Specifications

Specifications
(at 0° to 40°C unless
otherwise specified)
U8001A U8002A U8031A U8032A
Number of outputs 1 1 3 3
Two variable Two variable
One fixed One fixed
Output ratings 0 to 30 V 0 to 30 V 0 to 30 V 0 to 60 V
0 to 3 A 0 to 5 A 0 to 6 A 0 to 3 A
5 V fixed output
1
(U8031A and U8032A output channel 3)
Voltage & Current output N/A N/A 5 V, 3 A 5 V, 3 A
Output accuracy N/A N/A ≤ 5% or ≤ 5% or
(5 V ± 0.25 V) (5 V ± 0.25 V)
V rms N/A N/A < 2 mV < 2 mV
V peak-peak N/A N/A < 50 mV < 50 mV
Load and line regulation N/A N/A ≤ 5 mV ≤ 5 mV
Load and line regulation
(all models - output channels 1 & 2)
Voltage <0.01% + 2 mV <0.01% + 2 mV <0.01% + 2 mV <0.01% + 2 mV
Current <0.02% + 2 mA <0.02% + 2 mA <0.02% + 2 mA <0.02% + 2 mA
Ripple and noise
CV peak-peak 12 mV 12 mV ≤10 mV ≤10 mV
CV rms <1 mV <1 mV ≤1 mV ≤1 mV
CC rms 3 mA 3 mA ≤1 mA ≤1 mA
Load transient response time (from full load to half load and from half load to full load)
Recovery time to within 15 mV <50 s <50 s <50 ms <50 ms
Programming accuracy
2
(25°C ±5°C)
Voltage <0.35% + 20 mV <0.35% + 20 mV <0.25% + 15 mV <0.25% + 15 mV
Current <0.35% + 20 mA <0.35% + 20 mA <0.30% + 15 mA <0.30% + 15 mA
Readback accuracy
2
(25°C ±5°C)
Voltage <0.35% + 20 mV <0.35% + 20 mV <0.25% + 10 mV <0.25% + 10 mV
Current <0.35% + 20 mA <0.35% + 20 mA <0.25% + 10 mA <0.25% + 10 mA
Meter resolution
Voltage 10 mV 10 mV 10 mV 10 mV
Current 10 mA 10 mA 10 mA 10 mA
Maximum output float voltage ±240 VDC ±240 VDC ±240 VDC ±240 VDC
More protection, more convenience — for
less
It’s often difficult to find a power
supply that is just right for your
test requirements and your budget.
Whether you’re manufacturing
consumer products, testing electronic
components, or simply looking for
reliable, affordable power, Agilent’s
family of basic power supplies now
includes the U8001A/U8002A single
output and U8031A/U8032A triple
output non-programmable models
delivering up to 375 W of total power.
With capabilities typically found
only in programmable supplies, you
get excellent value along with great
efficiency in your work. As a result,
you can minimize setup time and
measurement errors and maximize
device reliability. You’ll get the right
power with a difference — backed
by stringent safety certifications
and Agilent quality standards —
at an affordable price.
The Agilent U8000 Series offers
single output and triple output non-
programmable DC power supplies
that include features typically found
only in programmable supplies.
The U8000 Series delivers excellent
value by providing reliable DC power,
efficient setup capabilties, and
important security features that let
you address a variety of applications
in electronics manufacturing and
educational settings.
Basic DC Power Supplies essential features for a tight budget
More detailed specifications at www.agilent.com/find/lowcostpower
16
90 W to 375 W total output power, up to 60 V and 6 A
Single and triple output models in half rack width size
Low noise, linear regulation
Single range output provides more current at lower voltage settings
U8001A, U8002A, U8031A, U8032A
Single & Triple Output
90-375 W
1
The specifications referenced in this section are for Output Channel 3 (5 V fixed output). All other
specifications listed for the U8031A and U8032A in this table are intended for Output Channel 1 and 2.
2
Specifications are based on one hour warm-up period