Specifications

178
AC Power Source/Analyzers: 375-1750 VA
(Continued)
More detailed specifications at www.agilent.com/find/6800
AC Power Source/Analyzers an integrated AC power solution
Opt 832 4 mm
2
wire size, unterminated
 (6813Bonly)
Opt 833 1.5 mm
2
wire size, 200 to
 240VAC,unterminated(6812Bonly)
Opt 834 10 AWG, 100 to 120 VAC,
 unterminated(6812Bonly)
Opt 841 Line cord with NEMA L6-20P;
 20A,250Vplug(6812Bonly)
Opt 842 Line cord with IEC 309;
 32A,220Vplug(6813Bonly)
Opt 844 Line cord with NEMA L6-30P;
 30A,250Vlockingplug(6813Bonly)
Opt 845 Line cord with IEC 309;
 16A,220Vplug(6812Bonly)
Opt 846 Line cord with NEMA L6-30P;
 30A,120Vplug(6812Bonly)
Agilent Models: 6811B, 6812B, 6813B
574.7 mm
22.63"
425.5 mm
16.75"
12.7 mm
0.5"
50.8 mm
2.0"
128 mm
5.04"
Terminal Strip
Screw Size: 6-32
132.6 mm
5.2"
Rear
Top
Side
Ordering information
Opt 019 2000 VA AC power source/
 analyzer(6813Bonly)
Opt 020 Dual power analyzer option
Opt 026 26 Volt, 0.1A auxiliary
45 to 100 Hz only
 referenceoutput(6812Band6813B)
0L1 English printed users, programming,
quick start guides, reference card (full
documentation on CD-ROM)
Opt 100(6811Band6812Bonly)
87 to 106 VAC (100 VAC nominal),
47-63 Hz, Japan only
Opt 120 104-127 VAC
(120 VAC nominal), 47-63 Hz
Opt 200(6813Bonly)174-220VAC
(200 VAC nominal), 47-63 Hz,
Japan only
Opt 208(6811Band6812Bonly)
174 to 220 VAC (208 VAC nominal),
47-63 Hz
Opt 230 191 to 254 VAC
(230 VAC nominal), 24-63 Hz
Opt 831 12 AWG, 200 to 240 VAC,
 unterminated(6812B,6813Bonly)
Opt 847 Line cord with CEE 7/7;
 16A,220Vplug(6812Bonly)
Opt 848LinecordwithBS546;
 15A,240Vplug(6812Bonly)
See the AC line voltage and cord section,
for more details on line cords.
Accessories
* 1CM003A Rack mount flange kit
132.6 mm H (3U) - two flange brackets
* 1CP002A Rack mount flange and handle
kit 132.6 mm H (3U) - two brackets and
front handles
E3663AC Support rails for Agilent
rack cabinets
* Support rails required