Specifications

128
Mobile Communications DC Sources
40-100 W (Continued)
More detailed specifications at www.agilent.com/find/66300
Application Specific DC Power Supplies tailored solutions for specific needs
Accessories
* 1CM024A Rack mount flange kit including
filler panel 88.1 mm H (2U) - one bracket,
 onehalf-modulebracket(66309B/D, 
 66311B,66319B/D,66321B/D)
* 1CM002A Rack mount flange kit
88.1 mm H (2U) - two flange brackets;
1.75 in hole spacing (66332A)
* 1CP001A Rack mount flange and handle
kit 88.1 mm H (2U) - two brackets
and front handles (66332A)
* 1CM021A Rack mount flange kit
88.1 mm H (2U) - 1.75 in hole space,
side-by-side mounting (N/A for 66332A)
p/n 1494-0060 Rack slide kit
(66332A only)
Ordering information
Opt 100 87 to 106 Vac, 47 to 63 Hz
Opt 120 104 to 127 Vac, 47 to 63 Hz
Opt 220 191 to 233 Vac, 47 to 63 Hz
Opt 230 207 to 253 Vac, 47 to 63 Hz
Opt 004 Make “Hi Compensation Mode”
as default setting
Opt 007 Extra 5-pin output connectors
(2 x p/n 0360-2604
Opt 020 Front-panel binding posts
(66332A only)
Opt UJ0 No front panel binding posts
(66332A only)
Opt 521 Solid state relays
 (66309B/D,66319B/D)
Opt AYK No solid state relays
 (66309B/D,66319B/D)
Opt 760 Isolation and reversal
relays (66332A only)
Opt 8ZJ Delete feet
Opt 8ZL Include feet
Opt 0L1 English printed users guide
(full documentation on CD-ROM)
Opt 0B3 English printed service manual
Agilent Models: 66309B/D, 66311B, 66319B/D, 66321B/D
Top
Side
425.8 mm
16.8"
435 mm
17.13"
212.8 mm
8.4"
88.1 mm
3.5"
Rear
88.1 mm
3.5"
E3663AC Support rails for
Agilent rack cabinets
14565B Device Characterization
withBatteryDrainAnalysis&Test
Automation
14565U Device Characterization
Software Upgrade (provides upgrade
from14565Ato14565BSoftware)
Note:BatteryDrainAnalysismeans
Data Logging and CCDF measurements.
These capabilities require models
66319B,66319D,66321Bor66321D
with version A.03.00 firmware or higher
and14565Bor14565Asoftwareversion
3.01 or higher.
* Support rails required