Specifications

Measurement Accuracy (At 23 °C ±5 °C)
Voltage 0.05% + 5 mV
2
5 mV
2
Current high range 0.1% + 600 µA
2
600 µA
2
Current low range (≤ 150 mA) 75 µA
2
75 µA
2
Programming Resolution
Voltage 2.5 mV 2.5 mV
Positive Current 1 mA 1 mA
Negative Current 10 mA N/A
Maximum Up-Programming and Down-
Programming Time with Full Resistive Load
(time from 10% to 90% of total voltage excursion)
Voltage Settling from 0 V to Full Scale 4.0 ms 4.0 ms
Voltage Settling from Full Scale to 0 V 4.0 ms 4.0 ms
Maximum Up-Programming and Down-
Programming Settling Time with Full
Resistive Load
(time from start of voltage change until voltage
settles within 0.1% of the full-scale voltage
of its final value)
Voltage Settling from 0 V to Full Scale 20 ms 20 ms
Voltage Settling from Full Scale to 0 V 20 ms 20 ms
Over-voltage Protection
Accuracy without disconnect relays 0.25% + 75 mV 75 mV
Accuracy with disconnect relays 0.25% + 275 mV 275 mV
Nominal range 0 – 10 V 0 – 10 V
Programmable delay time (from occurrence of 60 µs – 5 ms 60 µs – 5 ms
over-voltage condition to start of output shutdown)
Over-Current Protection
Programmable delay time 0 – 255 ms 0 – 255 ms
Nominal Range 5 mA – 3.06 A 5 mA – 3.06 A
Output Ripple and Noise: (PARD)
CC rms 4 mA 4 mA
Common Mode Noise
(from 20 Hz – 20 MHz; from either output to chassis)
Rms 1 mA 1 mA
Peak-to-peak 6 mA 6 mA
Module Specifications
N6783A-BAT N6783A-MFG
123
Application Specific Modules
N6783A-BAT, N6783A-MFG (Continued)
More detailed specifications at www.agilent.com/find/N6783A-BAT
www.agilent.com/find/N6783A-MFG
Application Specific DC Power Supplies tailored solutions for specific needs
Notes:
2
Applies when measuring the default value of 1024 data points
long-term.WhenusedintheN6705B
DC Power Analyzer mainframe short
and long-term measurements for
battery validation are made easy.
TheN6783A-BATcanalsobeusedto
condition batteries for test in mobile
devices by charging or discharg-
ing the battery to a specific level in
order to see how the device performs
under specific conditions. This
allows R&D engineers to understand
real-world operation of their designs
during different levels of charge.
TheN6783A-BATcanbeusedfor
battery charge/discharge only. For
advanced battery test, battery drain
analysis and battery emulation use
the N6781A 2-Quadrant SMU for
BatteryDrainAnalysis.
Solution for battery powered
device manufacturers
The N6783A-MFG Mobile
Communications DC Power Module
offers advanced features specifi-
cally for testing battery-powered
(mobile) devices in manufacturing.
The N6783A-MFG’s excellent voltage
transient response ensures a stable
output voltage is maintained at the
device under test (DUT) during load
transients. This maximizes system
throughput by eliminating inadver-
tent device shutdowns that occur if
the voltage is allowed to droop too
low, such as when a non-specialized
power supply is used. The built-in
digitizer also allows for maximum
throughput by providing fast, accu-
rate, flexible measurements that are
customizable to the level of speed
and accuracy desired.