Specifications

New instrument category
The Agilent N6705 DC Power
Analyzer represents an entirely
new instrument category for R&D
engineers. It provides unrivaled
productivity gains when sourcing
and measuring DC voltage and cur-
rent into a DUT. Using the Agilent
N6705 DC Power Analyzer, R&D
engineers can gain insights into
the DUT’s power consumption in
minutes without writing a single
line of code. It provides an easy-to-
use interface, with all sourcing and
measuring functions available from
the front panel. When automated
bench setups are required, the
N6705Bisfullyprogrammable
overGPIB,USB,LANandisLXI
Core Compliant.
Modular System Based on
DC Power Supply Outputs
TheAgilentN6705BDCpower
analyzer is a modular system that
is tailorable to meet specific test
needs. At the heart of the DC
power analyzer is the DC power
module.TheAgilentN6705BDC
power analyzer is a mainframe that
has four slots to accept one to four
DC power modules. Each DC power
module takes one slot, except for
the N6753A, N6754A 300 W and
N6755A, N6756A 500 W high per-
formance
autoranging DC power
High Performance DC Power Supplies speed and accuracy for test optimization
Specifications
(at 0° to 55°C unless
otherwise specified)
N6730B N6740B N6770A N6751A N6753A N6754A
N6752A N6755A N6756A
Note
More detailed specifications at www.agilent.com/find/N6705B
118
Flexible configuration to meet your power sourcing and analysis requirements
4-slot mainframe that accepts up to 4 DC power modules
600 W total DC power module output power
The modules are ordered separately
Modular DC Power Analyzer
600 W GPIB, LAN, USB, LXI Core
Output ratings*
Voltage
6 models 6 models 5 models 50 V 20 V 60 V
5 V to 100 V 5 V to 100 V 20 V to 150 V
Current 6 models 6 models 5 models 5 A 50 A 20 A
0.5 A to 10 A 1 A to 20 A 2 A to 15 A 10 A 17 A
Power 50 W 100 W 300 W 50 W 300 W 300 W
100 W 500 W 500 W
Autoranging No No No Yes Yes Yes
Measurement accuracy*
Voltage 0.1% + 20 mV 0.1% + 20 mV 0.1% + 20 mV 0.05% + 0.05% + 0.06% +
to 100 mV to 100 mV to 150 mV 20 mV 10 mV 25 mV
Current
0.15% + 2 mA 0.15% + 2 mA 0.15% + 6 mA 0.1% + 0.1% + 0.1% +
to 20 mA to 20 mA to 15 mA 4 mA 30 mA 8 mA
Noise (20 Hz to 20 MHz)*
10 mVpp to 11 mVpp to 20 mVpp to 0.35 mVrms 1 mVrms 1 mVrms
30 mVpp 30 mVpp 68 mVpp 4.5 mVpp 5 mVpp 6 mVpp
Polarity reverse relays Optional Optional Optional Not Optional Optional
available
Output relays Optional Optional Optional Optional Optional Optional
*Key Specifications (Range of values for families of modules – see data sheet for specifics)
Scope: Up to 100 kHz digitizer for N673x, N674x, N675x, N676x, N677x, and N6783 modules;
Up to 200 kHz for N678x SMUs
ARB: Approx max bandwidth = 5 kHz for N675x and N676x modules; 500 Hz for N673x, 4x, 7x, and 83 modules;
100 kHz for N678x SMUs
Note: Requires special installation. Instructions ship with the module.
N6705B
modules, and the N6763A, N6764A,
300 W and N6765A, N6766A 500 W
precision
autoranging DC power
modules, which occupy two slots.
The N6705Bacceptsthesamemod-
ules as N6700 Low-Profile Modular
Power System. Select from more
than 30 different DC power modules
ranging in capability from basic to
high precision/source measure unit,
and in power from 20 W to 500 W.
This modular design gives you the
flexibility to mix and match over
twenty different DC power modules
to create a solution optimized to
meet specific test requirements.