Specifications
105
Low-Profile Modular Power System
20-500 W GPIB (Continued)
Specifications
(at 0° to 55°C, and
derated above 40°C)
M
ore detailed specifications at
www.agilent.com/find/N6700
High Performance DC Power Supplies speed and accuracy for test optimization
N6761A N6762A N6763A N6764A N6765A N6766A
4
When relay option 760 or 761 is installed on Model N6763A and N6765A, the settling band is ± 200 mV.
5
When relay option 760 or 761 is installed on Model N6764A and N6766A, the settling band is ± 350 mV.
6
If you are operating the unit below 255 µA in constant current mode, the output may become unregulated with
the following load conditions: The load resistance is <175 mΩ and the load inductance is > 20 µH. If this occurs,
an UNRegulated flag will be generated and the output current may rise above the programmed value but will
remain less than 255 µA.
Source effect (Regulation)
Voltage 0.5 mV 0.5 mV 0.5 mV 1.2 mV 0.5 mV 1.2 mV
Current 30 A 30 A 5 mA 2 mA 5 mA 2 mA
Load transient recovery time
Time to recover to within the settling band following a load change
- from 60% to 100% and from 100% to 60% of full load for model N6761A
- from 50% to 100% and from 100% to 50% of full load for model N6762A though N6766A)
Voltage settling band ± 75 mV ± 75 mV ± 30 mV
4
± 90 mV
5
± 30 mV
4
± 90 mV
5
Time < 100 s < 100 s < 100 s < 100 s < 100 s < 100 s
(Non-warranted characteristics determined by design
Supplemental Characteristics
that are useful in applying the product)
Programming range
Voltage, high range 15 mV - 15 mV - 10 mV - 25 mV - 10 mV - 25 mV -
51 V 51 V 20.4 V 61.2 V 20.4 V 61.2 V
Voltage, low range 12 mV - 12 mV - N/A N/A N/A N/A
5.5 V 5.5 V
Current, high range 1 mA - 1 mA - 50 mA - 20 mA - 50 mA - 20 mA -
1.53 A 3.06 A 51 A 20.4 A 51 A 17.3 A
Current, low range 0.1 mA - 0.1 mA - N/A N/A N/A N/A
0.1 A
6
0.1 A
6
Programming resolution
Voltage, high range 880 V 880 V 1.5 mV 4.2 mV 1.5 mV 4.2 mV
Voltage, low range 90 V 90 V N/A N/A N/A N/A
Current, high range 60 A 60 A 16.3 mA 6.5 mA 16.3 mA 6.5 mA
Current, low range 2 A 2 A N/A N/A N/A N/A
Measurement resolution
Voltage, high range 440 V 440 V 250 V 600 V 250 V 600 V
Voltage, low range 44 V 44 V 25 V 60 V 25 V 60 V
Current, high range 30 A 30 A 500 A 250 A 500 A 250 A
Current, low range 1 A 1 A 20 A 10 A 20 V 10 A
200 A current range (Option 2UA) 4 nA 4 nA N/A N/A N/A N/A
Programming temperature coefficient per °C
Voltage, high range 18 ppm + 18 ppm + 23 ppm + 23 ppm + 23 ppm + 23 ppm +
140 V 140 V 95 V 218 V 95 V 218 V
Voltage, low range 40 ppm + 40 ppm + N/A N/A N/A N/A
70 V 70 V
Current, high range 33 ppm + 33 ppm + 25 ppm + 25 ppm + 25 ppm + 25 ppm +
10 A 10 A 129 A 52 A 129 A 52 A
Current, low range 60 ppm + 60 ppm + N/A N/A N/A N/A
1.5 A 1.5 A
Universal AC input
The N6700 has a universal input
that operates from 100-240 VAC,
50/60/400 Hz. There are no switches
to set or fuses to change when
switching from one voltage standard
to another. The AC input employs
power factor correction.
Choosing the Right DC Power
Modules to Meet Your ATE Needs
DC power supply modules for the
N6700systemareavailableinBasic,
High-Performance and Precision
models.BasicDCpowermodules
provide programmable voltage and
current, measurement and protection
features at a very economical price,
making these modules suitable to
power the DUT or to provide power
for ATE system resources such as
fixture control. High-Performance,
DC power modules provide low noise,
high accuracy and programming
speeds that are up to 10 to 50 times
faster than other programmable
power supplies. Precision DC power
modules provide precise control and
measurements in the milliampere
and microampere region with the
ability to simultaneously digitize
voltage and current, and capture
those measurements in an
oscilloscope-like data buffer.
Modules with autoranging output
capability that extends the available
voltage or current range while stay-
ing within a module’s power rating,
enables one power supply to do the
job of several traditional power
supplies.