Specifications

98
Supplemental characteristics
for all model numbers
DC floating voltage: All outputs can be
floated up to ±240 VDC from chassis
ground
Remote sensing: Up to 1 V drop per
load lead. The drop in the load leads is
subtracted from the voltage available
for the load.
Command processing time: 7 ms typical
with front-panel display disabled
Down programming: Current sink limits
are fixed approximately 10% higher than
source limits for a given operating
voltage above 2.5 V
Input power: 550 W max., 720 VA max.
GPIB interface capabilities: SH1, AH1, T6,
L4, SR1, RL1, PP1, DC1, DT0.
Software driver:
VXIPlug&Play
Regulatory compliance: Listed to UL1244;
conforms to IEC 61010-1; carries the CE
mark.
Size: 425.5 mm W x 132.6 mm H x
497.8 mm D (16.75 in x 5.22 in x 19.6 in)
Weight: Net, 17.4 kg (38 lb);
shipping, 22.7 kg (50 lb)
Warranty: Three years
Ordering information
Opt 100 87 to 106 VAC, 47 to 66 Hz input,
6.3 A (Japan only)
Opt 120 104 to 127 VAC, 47 to 63 Hz
Opt 220 191 to 233 VAC, 47 to 66 Hz, 3.0 A
Opt 240 209 to 250 VAC, 47 to 66 Hz, 3.0 A
Opt 750 Relay Control and DFI/RI
Opt S50 Similar to option 750, however
the remote inhibit does not latch
Opt 0L1 English printed operating
manual (full documentation on
CD-ROM)
Opt 0B3 English printed service manual
Multiple-Output: 40 W-105 W GPIB (Continued)
Specifications
(at 0° to 55°C unless
otherwise specified)
40 W 40 W 80 W 80 W 105 W
output output output output output
Supplemental Characteristics (Non-warranted characteristics determined by design and
useful in applying the product)
Average programming Voltage 6 mV 15 mV 6 mV 6 mV 10.5 mV
resolution
20 mV (high) 20 mV (high)
Current 25 mA 10 mA 50 mA 50 mA 15 mA
20 mA (high) 20 mA (high)
OVP 100 mV 250 mV 100 mV 2 50 mV 175 mV
Output programming response time 2 ms 6 ms 2 ms 6 ms 6 ms
(time to settle within 0.1% of full scale output,
after Vset command has been processed)
More detailed specifications at www.agilent.com/find/6620
High Performance DC Power Supplies speed and accuracy for test optimization
Accessories
* 1CM003A Rack mount flange kit
132.6 mm H (3U) - two flange brackets
* 1CP002A Rack mount flange and handle
kit 132.6 mm H (3U) - two brackets
and front handles
p/n 1494-0059 Rack slide kit
Output 2 Output 4
Output 3 Output 1
Top
Terminal Strip Detail
Output 2 & 3
Side
Rear
Output 1 & 4
425.5 mm
16.75"
497.8 mm
19.6"
518.2 mm
20.4"
128 mm
5.04"
-O V +O V -S
-V +V +S
+S +V -V +S +O V
-O V
12.7 mm
0.5"
132.6 mm
5.2"
Screw Size:
M35 x 0.6
Terminal Strip Detail
Output 2 & 3
Output 1 & 4
-O V +O V -S -V +V +S
+S +V -V +S +O V
-O V
Screw Size:
M3.5 x 0.6
Agilent Models: 6621A, 6622A, 6623A, 6624A, 6627A
E3663A Support rails for
Agilent rack cabinets
* Support rails required