Specifications

58 Customizing the System Chapter 3
Figure 3-1. Enabling Global Reset Using the System Configuration Editor
1. Double-click on the module/instrument name to be edited, or
click on the name and then on “Edit”
4. Click on “OK”
5. Click on “Save” to save the file or “Save As”
to save the file under a different name and/or directory
2. Click on the “InGlobalReset” value and
change the value to “1” to enable the
reset routine or “0” to disable the routine.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com