Specifications

System Instrument Configuration 31Chapter 2
Chapter 2
System Instrument Configuration
Chapter Contents
This chapter shows how to configure the different VXI and GPIB modules
and instruments in the system. Chapter contents are:
• VXI Module Locations And Logical Addresses. . . . . . . . . . page 32
• Power Supplies Locations and GPIB Addresses. . . . . . . . . . page 31
• VXI Modules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 34
• Programmable Power Supplies . . . . . . . . . . . . . . . . . . . . . . . page 48
GPIB Instrument Locations And Addresses
The TS-5400 System supports an Agilent 34401A Digital Multimeter,
33120A Arbitrary Waveform Generator, and 53131A Universal Counter.
The GPIB address always starts with a 1 on the first GPIB instrument. The
next instrument increments the address by 1 (i.e., address value of 2), and so
on. The instruments are prioritized in the following order.
Agilent 34401 Digital Multimeter
Agilent 33120 Arbitrary Waveform Generator
Agilent 53131 Universal Counter
The first instrument is always address 1. If the Agilent 34401 is not installed,
then the next instrument would be the Agilent 33120 with an address of 1,
the next has an address of 2, and so on.
Power Supplies Locations and GPIB Addresses
The TS-5400 System uses one or more of the Agilent 6642A, 6643A,
6652A, 6653A, 6672A, or 6673A Power Supplies. The supplies are located
in the in the lower front part of the system and numbered from bottom to
top. The lowest mounted power supply is PS1 (Power Supply #1), the next
higher is PS2 (Power Supply #2), and so on.
The GPIB address of the lowest Power Supply (PS1) is 5 with the address of
each additional Power Supply incremented by 1 (for example, PS2 has a
GPIB address of 5 + 1 = 6).
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com