Specifications
System Introduction 25Chapter 1
Mass Interconnect
(Mac Panel)
The Mac Panel Mass Interconnect uses a high-point count mass interconnect
fixture (Agilent E3722A) and interchangeable Interface Test Adapter
panels. Figure 1-8 shows the Mac Panel Mass Interconnect features. Refer
to the Agilent E6170 Mass Interconnect System User’s Manual supplied
with your system for detailed information.
Multiplexed
Instruments
Instruments are multiplexed to the Analog Bus using the Agilent E6171B
Measurement and Control Module's 4x16 instrument matrix and/or the
Agilent E8792A 32-Pin Matrix 4x16 instrument matrix.
Digital Multimeter (DMM) Either the Agilent E1411B or 34401 Digital Multimeter (DMM) can be used
as the system DMM.In addition to test measurements, the DMM serves as
the system reference and is used to adjust other modules and instruments.
Agilent E1411B Digital
Multimeter
The Agilent E1411B 5.5-Digit DMM is a C-size, 1-slot, register-based VXI
module. You can use its integrating A/D to make 5.5-digit, low-noise
measurements, or switch to the sampling A/D to make 14-bit readings at
Figure 1-8. Mac Panel Mass Interconnect
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com