User`s guide

2 - General Information
20
Safety Considerations
This dc source is a Safety Class 1 instrument, which means it has a protective earth terminal. That
terminal must be connected to earth ground through a power source equipped with a ground receptacle.
Refer to the Safety Summary page at the beginning of this guide for general safety information. Before
installation or operation, check the dc source and review this guide for safety warnings and instructions.
Safety warnings for specific procedures are located at appropriate places in the guide.
Options and Accessories
Table 2-1. Options
Option Description
100
87−106 Vac, 47−63 Hz
220
191−233 Vac, 47−63 Hz
230
207−253 Vac, 47−63 Hz
8ZJ Delete instrument feet option
AXS
1
Rack mount kit for two side-by-side units of equal depth. Consists of:
Lock-link kit (Agilent p/n 5061-9694) and Flange kit (Agilent p/n 5062-3974)
1CM
1
Rack mount kit for one unit (Agilent p/n 5062-3972)
052 Device characterization software for current measurements and display
(available for Agilent Model 66311B only)
1
Support rails are required when rack mounting units. Use E3663A support rails for Agilent rack cabinets,
and E3664A for non-Agilent rack cabinets.
Table 2-2. Accessories
Item Agilent Part Number
GPIB cables 1.0 meter (3.3 ft) Agilent 10833A
2.0 meters (6.6 ft) Agilent 10833B
4.0 meters (13.2 ft) Agilent 10833C
0.5 meters (1.6 ft) Agilent 10833D
RS-232 cable 9-pin F to 9-pin F, 2.5 meter, null modem/printer cable
with one 9-pin M to 25-pin F adapter
Agilent 34398A
RS-232 adapter kit - contains the following 4 adapters
9-pin M to 25-pin M for pc or printer
9-pin M to 25-pin M for pc or printer
9-pin M to 25-pin M for modem
9-pin M to 9-pin M for modem
Agilent 34399A
Rack mount with slide - for two side-by-side units of different depths 5062-3996; 1494-0015
Rack mount - for two side by side units of different depths 5062-3996
Rack mount with slide - for one unit 5062-3996; 1494-0015;
5062-4022
Remote Front Panel - for viewing up to six Agilent 66111A/66311B units
that
are installed in a remote location where the front panels is not visible.
Includes an ac/dc adapter for powering up to 3 remote panels
Agilent 14575A