User`s guide

1 - Quick Reference
18
SCPI Programming Commands - At a Glance
NOTE: Some [optional] commands have been included for clarity. Refer to chapter 8 for a
complete description of all programming commands.
ABORt SENSe
CALibrate :CURRent :RANGe <n>
1
:CURRent [:POSitive] :DETector ACDC | DC
1
:NEGative :FUNCtion “VOLT” | “CURR”
:MEASure :LOWRange
1
:PROTection :STATe <bool>
:AC
1
:SWEep :OFFSet :POINts <n>
:DATA <n> :POINts <n>
:LEVel P1 | P2 :TINTerval <n>
:PASSword <n> :WINDow :TYPE “HANN” | “RECT”
:SAVE [SOURce:] CURRent <n>
:STATe <bool> [, <n>] :TRIGgered <n>
:VOLTage [:DC] :PROTection :STATe <bool>
:PROTection DIGital :DATA <n>
DISPlay :FUNCtion RIDF | DIG
<bool> VOLTage <n>
:MODE NORMal | TEXT :TRIGgered <n>
:TEXT <display_string> :PROTection <n>
FORMat :STATe <bool>
[:DATA] ASCII | REAL [,length] STATus
:BORDer NORM | SWAP :PRESet
INITiate :OPERation [:EVENt]?
:SEQuence[1|2] :CONDition?
:NAME TRANsient | ACQuire :ENABle <n>
:CONTinuous :SEQuence[1], <bool> :NTRansition <n>
:NAME TRANsient, <bool> :PTRansition <n>
MEASure | FETCh :QUEStionable [:EVENt]?
:ARRay :CURRent? :CONDition?
:VOLTage? :ENABle <n>
[:CURRent] [:DC]? :NTRansition <n>
:ACDC?
1
:PTRansition <n>
:HIGH?
1
SYSTem
:LOW?
1
:ERRor?
:MAX?
1
:LANGuage SCPI | COMPatibility
:MIN?
1
:VERSion?
:VOLTage [:DC]? :LOCal
:ACDC?
1
:REMote
:HIGH?
1
:RWLock
:LOW?
1
TRIGger
:MAX?
1
:SEQuence2| :ACQuire [:IMMediate]
:MIN?
1
:COUNt :CURRent <n>
OUTPut :VOLTage <n>
<bool> :HYSTeresis:CURRent <n>
:DFI <bool> :VOLTage <n>
:SOURce QUES | OPER | ESB | RQS | OFF :LEVel :CURRent <n>
:PON :STATe RST | RCL0 :VOLTage <n>
:PROTection :CLEar :SLOPe :CURRent POS | NEG | EITH
:DELay <n> :VOLTage POS | NEG | EITH
:RI :MODE LATCHing | LIVE | OFF :SOURce BUS | INTernal
:TYPE [:CAPacitance] HIGH | LOW [:SEQuence1| :TRANsient][:IMMediate]
:SOURce BUS
:SEQuence1 :DEFine TRANsient
1
Only available on Agilent Model 66311B :SEQuence2 :DEFine ACQuire