User`s guide

rails are neither required nor
available to rack mount an
N6700A mainframe. The
N6700A can only be rack
mounted using Option 908
(p/n N6700-60009). No other
means of rack mounting should
be used due to airflow and
height restrictions. For more
information please see the
Installing the Unit section in
the Installation chapter of the
N67xxA User’s Guide.
Output Connectors
Pin-outs
The 662xA series output con-
nector is a 6-pin terminal block
that consists of +S, +V, -V, -S,
+OV, and -OV. The orientation
of the connector depends on
the output.
Output 2 & 3:
-OV, +OV, -S, -V, +V, +S
Output 1 & 4:
+S, +V, -V, -S, +OV, -OV
See Figure 2a in Appendix B.
The N67xxA output connector
is a 4-pin (phoenix) connector
that consists of +S, +, -, and –S
from left to right (when looking
at the rear of the unit). There
are no OV terminals. See
Figure 2b in Appendix B.
Placement
Please see Figures 1a and 1b
in Appendix B for output
connector placement.
Power Cord, GPIB,
and Other Connectors
Please see Figures 1a and 1b in
Appendix B for placement details.
15