User`s guide

94 User’s Guide
The points where you clicked your mouse are shown as
Start Time and Stop Time. The integration will be turned
off between these points on your chromatogram. The
Value is set at zero, as no numeric value is required for
this event. Click Analyze Now to add the event to the
method and re-integrate the chromatogram. (Add to
Table will simply add the event to the integration timed
events table without re-integration.)
Select the button next to Insert into Integration Events
table and the event will be added to the Integration
Events Table of your method (where it will be used on all
chromatograms analyzed using this method). Select the
button next to Insert into Manual Integration Fixes
table and the event will be added to the Manual
Integration Fixes Table of the present chromatogram
(where it will be applied only to this chromatogram).
Your chromatogram will be re-drawn using the new
integration event. Notice that the area you selected has no
baselines drawn because the integration has been turned
off for these peaks.
4. The integration event is put into the Integration
Timed Events table. To view this table, click the
Integration Events button on the command ribbon.
Your integration timed events table will appear.
Notice the Integration Off timed event has been added
to the table.
5. To remove the Integration Off event from your
method, click on the Integration Off event name or