User`s guide

User’s Guide 93
into your method as Integration Timed Events. These events
can be placed at the beginning of the run to apply to all peaks,
or they can be inserted at a certain place in the
chromatogram such that only some peaks are affected. Follow
the steps below to add the timed event to turn off integration
to your method.
Note: You can perform this step using one of the multi calibration
level.dat files provided with the software.
1. At this point, your recently acquired
chromatogram should be displayed in your
chromatogram window. If it is not, click the Open
File button, select Open Data, and then select
your data file from the list displayed.
Alternatively, you can select one of the files
supplied with Elite.
2. Click the Analyze button to integrate the
chromatogram and display the baselines.
Note: If you don’t know what a button’s function is, simply move
the cursor over the button (don’t click) and a Tooltip box will
appear showing the button’s name or function.
3. To add the Integration Off timed event, click the
Int Off button on the Toolbar. As instructed in the
status bar at the bottom of the window, click your
mouse once prior to a part of the chromatogram
where you want to turn integration off. (Select a
section of chromatogram where one or more
peaks elute.) Then click the mouse again at the
point on the chromatogram where you want to
turn integration on again. A dialog will appear.