User`s guide

92 User’s Guide
2. At this point, enter Test in the Sample ID field.
3. In the Method field, either type your method
name, along with its path, or select the Test.met
file from a file list on your disk by clicking on the
open file button adjacent to the field.
4. Enter a path for storage of data files in the Data
Path field, or select a path from a list presented
by clicking the open file button adjacent to the
field.
5. Enter Test.dat as the name for storing your data
in the Data File field. You must enter a unique
file name in this field. Therefore, if you have
performed this tutorial before, you must first
delete this file from your disk, or move it to a
different directory before proceeding.
6. Since you are not doing calibration at this point,
simply click Start and inject your standard
sample. You will see the data as it is acquired in
the chromatogram window on your screen.
Set Integration Parameters Graphically
EZChrom Elite uses default integration parameters that are
appropriate for most simple chromatography. However, you
may have certain peaks that require special integration
treatment. Such special integration treatments are entered