User`s guide

82 User’s Guide
Select the On Stop or Error box to send email
notification when the sequence stops or if an error
occurs.
When you have completed the dialog box, click Start to
initiate the sequence acquisition. You may see the data
displayed in real time in the chromatogram window(s), if the
"current data" is selected for viewing.
Stop a Run in Progress
When you want to stop data acquisition during a run,
1. Click the STOP button that appears on the command
ribbon when the run is in progress, or from the
Control menu, click Stop Run.
2. Select how you want to stop the run. If you are
running an instrument connected to an Agilent
Instrument Controller, you will not be able to stop the
run or sequence unless you are the user that
submitted it.
Note: When using the STOP button, make sure to hold the mouse
button down until the STOP button icon changes to the
"depressed" appearance before releasing.
Stop current run only
Select this to end the run currently in progress. If the
run is a part of a currently-queued sequence, the
sequence will continue with the next run.