User`s guide

78 User’s Guide
Clear replicates
Click this box if you want to clear all existing
replicates from the existing calibration level before
running the sample.
Average replicates
Click this box if you want to average the replicates for
this calibration level.
Baseline Check
This box will appear if you have the Baseline Check
option implemented in the instrument configuration.
When this box is checked, it will trigger a baseline
check prior to the start of the run.
Begin run
By default, run will start immediately. If you want to
schedule the start of the sequence for a later time or
date, click the
button to open the Schedule Run
dialog where you can enter or select the time to start
the sequence.
Startup/Shutdown
For instruments that support it, boxes for Startup
and Shutdown will appear in the dialog. These boxes
enable you to designate the run as either a Startup or
Shutdown sample. When one of these boxes is
checked, it will trigger the Startup or Shutdown
routine on your instrument. For details, see the
control documentation for your instrument.
When you have completed the Single Acquisition Run dialog
box, click Start to begin the acquisition. The current data will
appear in the chromatogram window as it is acquired and
stored on disk. At the end of the run, the chromatogram will
be analyzed according to the method parameters, and a report
generated if specified. If the sample is not analyzed at the end
of the acquisition, click the Analyze button if you wish to
view the results.