User`s guide

72 User’s Guide
Parameters that can be set using graphical programming
include:
Command Action
Width Inserts a Width event at the point on the
chromatogram.
Threshold Inserts a Threshold event at the point on the
chromatogram.
Shoulder Sensitivity Inserts a Shoulder Sensitivity event at the point
on the chromatogram.
Integration Off Turns off integration at the point on the
chromatogram.
Valley to Valley Turns on valley to valley baseline detection.
Horizontal Baseline Forces a horizontal baseline from the point on
the chromatogram.
Backward Horizontal Baseline Forces a backward horizontal baseline from the
point on the chromatogram.
Lowest Point Horizontal Baseline Forces a horizontal baseline at the next lowest
point.
Tangent Skim Forces a tangent skim.
Front Tangent Skim Forces a front tangent skim.
Minimum Area Set a minimum area for peak detection.
Negative Peak Turn on negative peak detection.
Disable Peak End Detection Disables the end of peak detection.
Reassign Peak Designates a different peak as the calibrated
peak.
Manual Baseline Manually define a baseline.
Manual Peak Manually define the beginning and end of a
peak.
Split Peak Force a perpendicular to split a peak.
Force Peak Start Force the start of a peak.