User`s guide

User’s Guide 61
Align two traces
To Align one chromatogram to another,
1. In the chromatogram window, do a right mouse click,
and then select Operations followed by Align. Click
first on the point of the first chromatogram to which
you wish to align, then click on the peak (or point) of
the second chromatogram which you wish to align to
the first point. The second chromatogram will be
adjusted such that the peak (or point) you clicked
second will be aligned with the first point you clicked.
2. To remove the alignment, use the right-hand mouse
button/ Properties command to view the trace
spreadsheet. Click the Trace Setup tab, then scroll to
the right to the X-axis and Y-axis offset columns
where you can delete or change these settings. Click
the Reset Scaling button to restore ALL settings to
their original values.
Chromatograms before alignment.