User`s guide

User’s Guide 59
Move a Trace
To "grab" a trace and move it with your mouse
1. In the chromatogram window, do a right mouse click
and select Operations followed by Move Trace.
2. Move your cursor over a trace until the cursor
changes to a "move" icon.
3. "Grab" the trace by clicking the left mouse button and
dragging the trace to a new location. When you
release the mouse button, the trace will be placed
where your cursor was located when you released the
button.
4. "Move Trace" will appear at the upper right corner of
the window. You can continue to move traces. When
finished, do a right mouse click and select Operations
followed by the Move Trace command again to turn
off the move trace operation.
Stack Traces
To quickly change the X-axis and Y-Axis offset for a trace
1. In the chromatogram window, do a right mouse click
and then select Operations followed by Stack
Traces...
2. Enter a new X-axis and y-axis offset, and click OK.
The offset will be applied to additional traces
displayed in the chromatogram window.