User`s guide

54 User’s Guide
Hide Details
Click this button to hide the current trace details and
display only the spreadsheet.
Reset Scaling
Click this button to reset the scaling values to their
original values.
Remove a Trace
If you have multiple traces in your chromatogram window,
and you want to remove one or more of them from the
chromatogram window, click the right-hand mouse button
anywhere within the window, and select the Properties…
command. A spreadsheet will appear where the currently
displayed traces are listed.
To completely remove a trace from the chromatogram
window, select the row by clicking on the # number, then
press the Delete key on your keyboard, or select the
Edit/Delete command. To temporarily remove the trace from
the window, de-select the checkbox in the Show column.
Click OK to return to the chromatogram window.
Set Limits for X-Axis and Y-Axis
Occasionally, you may want to set an absolute range for either
the X-Axis or Y-Axis, or both. To set limits for the X- and Y-
axis,
1. From the chromatogram window, do a right mouse
click and then select Properties.
2. Click the Trace Setup tab to set Y-Axis minimum and
maximum values for the trace. To set an absolute
voltage range for all chromatograms, use the User-
Defined option for the Scale To field. You must then
enter a Y-Min (minimum Y-Axis value) and Y-Max
(maximum Y-Axis value) for each chromatogram. If
you want all chromatograms to be displayed using
this same voltage scale, enter the same values for all
chromatograms.