User`s guide

48 User’s Guide
Axis
Using the drop-down list, select the axis of interest:
Left Y-Axis, Right Y-Axis, or X-Axis. Then for your
selection, you can choose the limits for the axis.
For Y-Axis selections, you may choose Use limits of
trace to get the limits from one of the traces in the
window, or you can select the Manually set trace's
limits to box and set the Y-Axis limits to your desired
range. If you choose None, no Y-Axis values will be
displayed.
For the X-Axis, you may either choose to Autoscale,
where the X-Axis is set to the longest trace. Or, you
may set an absolute range for the X-Axis by clicking
the Use This Range button, then enter a minimum
and maximum X-Axis value for the trace. Click the
Get Limits button to retrieve the X-Axis range from
the current trace.
Margins
Enter a value for the trace margins, in percent, for
top and bottom of the graph.
General Options
Select the check boxes to turn these graph
annotations on and off. If the legend box is selected,
the legend for a trace can be turned on or off from the
Trace Properties spreadsheet.