User`s guide
42 User’s Guide
7. Click the check box(s) to display Baseline, USP
Width, or Retention Time Windows, Show
undetected named peaks, and Group ranges on the
trace. With the SEC option installed, you will have
access to additional SEC annotation features.
Note: The Reference Peak window annotation displays the window
set in the Peak Table. This window is not adjusted for relative
retention time.
8. Continue to select as many annotations as you wish
for this trace. When you have finished, click OK.
9. You can select or change annotation for an existing
trace by doing a right-mouse click in the
chromatogram window, then select the Annotation
command. The selections you make will apply to all
traces you open for this channel or until you change
them (the OK or Apply button). If you want to apply
the annotation changes to all open channels, click the
Apply to All button. Annotations are not saved as
part of the method and are considered a function of
the instrument application. If you close a method and
re-open it, the current settings will apply.
Change the Chromatogram Appearance
You can change the appearance of the trace (line type, color,
etc.) from the Appearance tab in the Properties box. Click on
this tab to display the Appearance tab dialog.
To change the appearance of a chromatogram or trace,
1. In the Chromatogram Window, do a right mouse click
and select Properties.
2. Click the Appearance tab.