User`s guide

User’s Guide 13
To turn the Navigation pane on
1. Select View followed by the Navigation pane
command.
To turn the Navigation pane off
1. Click the x button at the top of the Navigation pane.
You can also "park" the Navigation pane at the left of the
Instrument window, which provides additional work space.
Once the Navigation pane is parked, you can view it again by
simply moving your mouse over the Navigation tab that
appears at the left. The pane will disappear when you move
your mouse back into the work space.
To "park" the Navigation pane
1. Click the push-pin button at the top of the Navigation
pane.
6 Navigate the Instrument Window
The navigation pane of the instrument window gives you
single-click access to method, sequence, report, control, and
viewing options. The navigation buttons at the bottom of the
navigation pane open command trees that give you access to
commands that are also available from the menu bar of the
instrument window.
Navigation button Displays
Method Method commands, Data manual integration
fixes, and Tiled Display to display current data
tiled with selected Integration or Calibration
(Peak Table) information.
Sequence Edit
Reports Reports, Report template properties
Control Instrument Setup, Run Queue, Instrument
Status