User`s guide

108 User’s Guide

for the different fit types displayed are shown, along

with the goodness of fit calculation, r

, which is not

calculated for the Point-to-Point curve since it is by

definition a perfect fit to the data.

For additional details on using Review Calibration, see

Method Development. To close the window, click the X box

at the upper right corner of the Review Calibration window.

Explore a Peak Table

The Peak Table is where method calibration information is

located. In this section, you will use a method provided with

the software to examine a Peak Table and become familiar

with what a completed peak table looks like.

1. Open the multilevel calibration.met method which is

located in the c:\datasystem\Methods folder (where

datasystem is your program folder), by clicking the

File button, followed by Method, then selecting the

c:\datasystem\Methods\multilevel calibration.met

method from the list of methods on your disk.

2. Once the multilevel calibration.met method is open,

view the Peak Table by clicking the Peak Table button

on the command ribbon. A peak table will appear.

3. On the Named Peaks tab, you will find a table

containing all of the calibration information for the

calibrated peaks in this method. If you scroll to the

right, you will see many different columns, each of

which represent a parameter for the calibration,