User`s guide

106 User’s Guide
Enter the name of your sequence file by typing the name,
along with path, in the Sequence Name field. You can also
select it from a list of sequence files on your disk by clicking
the file button next to the field. Leave the other parameters as
their defaults.
Prepare your autosampler to inject your standard sample,
followed by 3 unknown samples. When you are ready to inject
your first sample, click Start. When the sequence is
completed, you will have acquired and saved the data files for
one standard and three unknown runs, and generated a
simple result report for each unknown sample and a
summary report for the sequence.
Because you have not yet defined a sequence summary
report, do not check the Print sequence reports box.
19 Using the Tutorial Files
In this section of the Tutorial, you will use the tutorial files
provided to become familiar with additional features of the
Data System.
Review Multi-level Calibration Curves
Once you have fully calibrated a method, the calibration
curves and associated data can be viewed using the Review
Calibration function. In order to see a fully calibrated multi-