User`s guide

User’s Guide 105
Sample ID’s and Data File names are numbered
automatically to prevent duplication. In order to run
a calibration standard as the first run, you must
designate that run to be a calibration run. This has
been done automatically by the Sequence Wizard.
Unknown runs always have a Level of "0". The
information in the Run Type field may be abbreviated
if there is more than one run type designation. To
view the possible Run Types, click the arrow next to
the run type. For details on each of these run types,
see the Sequence section. Since the method we have
been creating in this Tutorial is a single level
calibration, only one calibration standard run is
necessary.
14. To save the sample sequence file, click the Save\Save
Sequence button to go to the Save Sequence dialog
box, or use the File/Sequence/Save As command
from the menu bar. Select the
C:\datasystem\Sequence folder (where datasystem
is your program installation folder), then enter the
name Test or Test.seq for your sequence file name.
Note: By default, sequence files are saved with the .seq extension.
Run a Sequence
To acquire data using the sequence file you just created, click
the Sequence Run button on the command ribbon, or do a
right-hand mouse click in the sequence spreadsheet, and
select Run Sequence. A dialog box will appear.