Technical data

Configure the Agilent Instrument Controller Device
1. From the configuration computer (see “Before You Start”
section), open Internet Explorer and go to the address
http://192.168.1.1/iconsetup/login.aspx. If you have a
proxy server configured in Internet Explorer, you will need
to disable it.
2. Log in as Admin with no password. (Admin is case-
sensitive.)
3. On the General tab, enter the following information:
Name: for addressing the Agilent Instrument Controller
on the network
Location: physical location where the Agilent Instrument
Controller will operate
Comment: any additional comment you want to make
OL server URL: for example http://aspen. Be sure to use
a fully-qualified host name or address.
4. Click Submit.
5. On the Hardware tab, click Configure to the right of Intel®
PRO/100 VE Network, and make the following selections:
Obtain an IP address automatically
Obtain DNS server address automatically
6. Click Submit.
.
Note
Static IPs and DNS are also supported. If
these are used, they must be within the same
subnet range as the web server. See
Configure an Agilent Instrument Controller in
the online help for details.
7. From the Advanced tab on the computer, click Initialize.
8. Click Yes to confirm you want to initialize the Agilent
Instrument Controller. You may need to scroll down to see
Installing the AIC 5000 5