Technical data

3 Installing AIC 5000 for Agilent OL
Use this procedure for installing and configuring the Agilent
Instrument Controller AIC 5000. The AIC 5000 is black in color and
has “Instrument Controller 5000” stenciled on the front of the unit.
Install the Agilent Instrument Controller Network
Appliance
1. Before installing or configuring an Agilent Instrument
Controller, make sure all OL ECM and ICM components are
installed.
2. Verify which version of the Agilent Instrument Controller
you have. Installation of the AIC 5000 version is described in
this section. See later sections in this guide for instructions
on using the other two versions, Revision B and Revision A.
3. Create an “AIC User” account. (See “Add a New User” in the
online help for how to do this.) This should be a unique user
with full administrator rights (call this user “aicuser” for
example).
4. From the Administration tab, click Global Administration,
and then right click Agilent Instrument Controller. In the
General tab of the Properties dialog box, type the AIC user
account name and password, along with the account and
domain for the user. This will be used by the AICs to
communicate with the OL server. Click OK to close the
dialog box.
Installing the AIC 5000 3