Technical data
countries). If selected incorrectly, you may see line
frequency noise on your chromatogram. For best
performance, select a base frequency close to the
maximum sampling frequency you will be using to
acquire data.
Sampling frequencies available in the Acquisition Setup
portion of the method will reflect the Base Frequency
selected.
Range
For each channel used, select the button next to the
signal range for the detector connected to that channel.
Information
This area is for information only. It contains
manufacturing information about the interface box that
may be required in service situations. If the box is not
recognized, the “Connection Status” field will display
“Not Connected”.
5. When the dialog is completed, click Submit. To read the
current settings for the SS420x, click the Read SS420x
Settings button. To abort the operation without
changing any settings, click Cancel.
Configure Instruments
Before you can use the Agilent Instrument Controller to acquire
data, each instrument must be configured using the OL software.
See the OL help for instructions on how to configure instruments.
Installing AIC Revision A 29