User`s guide

the instrument and its detectors. To start the configuration of
an instrument, do a right mouse click on the instrument from
the Main menu, and select Configure. The Instrument
Configuration dialog will appear.
Instruments using SS420x for acquisition may be configured
as any available instrument type. If instrument type other
than Generic is selected, the detector model must be set to
analog, with acquisition source set to SS420x. When this is
selected, click Configure to continue.
SS420x Detector Configuration
To configure a detector to use SS420x for acquisition, select
SS420x for Acquisition Source. Then click the
button
next to the selection to do the Channel Configuration.
18 SS420x User’s Guide