User`s guide

2 - General Information
18
Safety Considerations
This dc source is a Safety Class 1 instrument, which means it has a protective earth terminal. That
terminal must be connected to earth ground through a power source equipped with a ground receptacle.
Refer to the Safety Summary page at the beginning of this guide for general safety information. Before
installation or operation, check the dc source and review this guide for safety warnings and instructions.
Safety warnings for specific procedures are located at appropriate places in the guide.
Options and Accessories
Table 2-1. Options
Option Description
100
87
−
106 Vac, 47
−
63 Hz
220
191
−
233 Vac, 47
−
63 Hz
230
207
−
253 Vac, 47
−
63 Hz
760 Isolation and polarity reversal relays (not available on Agilent 66312A)
1CM
1
Rack mount kit for one unit (p/n 5062-3972)
AXS
1
Rack mount kit for 2 side-by-side units. Consists of:
Lock-link kit (p/n 5061-9694) and Flange kit (p/n 5062-3974)
AXU Rack mount and slide kit for 2 side-by-side units of different depth. Consists of:
Support shelf (p/n 5062-3996) and Slide kit (p/n 1494-0015)
AXV Rack mount, slide kit, and support shelf for mounting one unit. Consists of:
Fill panel (p/n 5062-4022), Support shelf (p/n 5062-3996), and
Slide kit (p/n 1494-0015)
0BN Service manual with extra operating manuals
1
Support rails are required when rack mounting units. Use E3663A support rails for Agilent rack cabinets, and
E3664A for non-Agilent rack cabinets.
Table 2-2. Accessories
Item Part Number
GPIB cables
1.0 meter (3.3 ft) 10833A
2.0 meters (6.6 ft) 10833B
4.0 meters (13.2 ft) 10833C
0.5 meters (1.6 ft) 10833D
RS-232 cable 34398A
(9-pin F to 9-pin F, 2.5 meter, null modem/printer cable
with one 9-pin M to 25-pin F adapter
RS-232 adapter kit (contains 4 adapters) 34399A
9-pin M to 25-pin M for pc or printer
9-pin M to 25-pin M for pc or printer
9-pin M to 25-pin M for modem
9-pin M to 9-pin M for modem