User`s guide

1 - Quick Reference
14
SCPI Programming Commands - At a Glance
NOTE Most [optional] commands have been omitted for clarity. Refer to the Programming
Guide for a complete description of all programming commands.
ABORt SENSe
CALibrate
:CURRent :RANGe <n>
:CURRent [:POSitive] :DETector ACDC | DC
1
:MEASure :LOWRange :FUNCtion “VOLT” | “CURR”
1
:AC
1
:SWEep :OFFSet :POINts <n>
1
:DATA <n> :POINts <n>
:LEVel P1 | P2 | P3 | P4 :TINTerval <n>
:PASSword <n> [SOURce:] CURRent <n>
:SAVE :TRIGgered <n>
:STATe <bool> [, <n>] :PROTection :STATe <bool>
:VOLTage :PROTection DIGital :DATA <n>
DISPlay
:FUNCtion RIDF | DIG
<bool> VOLTage <n>
:MODE NORMal | TEXT :TRIGgered <n>
:TEXT <display_string> :PROTection <n>
INITiate STATus
:SEQuence[1|2
1
] :PRESet
:NAME TRANsient | ACQuire
1
:OPERation [:EVENt]?
:CONTinuous :SEQuence[1], <bool> :CONDition?
:NAME TRANsient, <bool> :ENABle <n>
MEASure | FETCh
2
:NTRansition <n>
:ARRay :CURRent?
1
:PTRansition <n>
:VOLTage?
1
:QUEStionable [:EVENt]?
[:CURRent][:DC]? :CONDition?
:ACDC?
1
:ENABle <n>
:HIGH?
1
:NTRansition <n>
:LOW?
1
:PTRansition <n>
:MAX?
1
SYSTem
:MIN?
1
:ERRor?
:VOLTage [:DC]? :LANGuage SCPI | COMPatibility
:ACDC?
1
:VERSion?
:HIGH?
1
:LOCal
:LOW?
1
:REMote
:MAX?
1
:RWLock
:MIN?
1
TRIGger
OUTPut
:SEQuence 2 | :ACQuire [:IMMediate]
1
<bool> :COUNt :CURRent <n>
1
:DFI <bool> :VOLTage <n>
1
:SOURce QUES | OPER | ESB | RQS | OFF :HYSTeresis:CURRent <n>
1
:PON :STATe RST | RCL0 :VOLTage <n>
1
:PROTection :CLEar :LEVel :CURRent <n>
1
:DELay <n> :VOLTage <n>
1
:RELay [:STATe] <bool>
3
:SLOPe :CURRent POS | NEG | EITH
1
:POLarity NORM | REV
3
:VOLTage POS | NEG | EITH
1
:RI :MODE LATCHing | LIVE | OFF :SOURce BUS | INTernal
1
[:SEQuence1 | :TRANsient][:IMMediate]
1
Not available on Agilent 6611C - 6614C. :SOURce BUS
2
Fetch commands not available on Agilent 6611C – 6614C :SEQuence1 :DEFine TRANsient
3
Not available on Agilent 66312A :SEQuence2 :DEFine ACQuire
1