Technical data

ManualsBrandsAgilent Technologies ManualsConsumer electronics6224B

66000 Modular

Power System

66300 Series

Mobile

Communications

E3640A Series

Single & Dual Output

6030 Series

Autorangers

6610 Series

Precision

Measurement

6620 Series

Multiple Output

6620 Series

Precision

Multiple Output

6630 Series

Single Output

6640 Series

Single Output

6650 Series

Single Output

6670 Series

Single Output

6680 Series

Single Output

Visit our web site

http://www.agilent.com/find/power

dc Range Max Power

200 - 1000 W

40 & 50 W 40 & 80 W 25 & 50 W

80 & 100 W

200 W 500 W 2000 W 5000 W 1200 W

40 - 100 W 30 - 100 W

Max Voltage 500 V 100 V 50 V 50 V 100 V 120 V 120 V 120 V 40 V 200 V 20V 60V

Max Current 120 A 5 A 10 A 2 A 10 A 20 A 50 A 220 A 875 A 16 A 5 A 8 A

Page 19 9 21 22 12 14 15 16 18 24 10 8, 23

Configuration Features

“One-box” solution

To preserve rack space and interconnections, the

voltage and current programmers, current shunt, and

••••••••••••

DVM are built-in to one package.

Modular power system

(multiple reconfigurable outputs)

Up to 8 modules can be installed into a mainframe,

•

andconfiguration can be changed at any time.

Multiple non-reconfigurable outputs

Up to four outputs are included in one package,

••

66309 B/D

and they share one GPIB address.

Serial link

Up to16 power supply outputs can share one

••••••

GPIB address when connected with a telephone-

style cable.

Relay connect, disconnect, and polarity reversal

A=Optionally integrated with the power supply A

B=Operates with relay accessories listed on page 33 B A C C A B B B A 66332A

C=Optionally operates with relay accessories listed Only

on page 33

Auto-parallel, auto-series, parallel,

and series operation S S S S S S S S, P S, P

When connected in auto-parallel or auto-series, AP P P AP AP AP AP

only one unit has to be programmed to take up to 2 up to 2

advantage of the full power from all. identical identical

AP=auto-parallel AS=auto-series S=series P=parallel

outputs outputs

Analog programming and monitoring ports

Analog programming ports allow the power supply

to be used as a power amplifier, responding to an

•••••

external voltage signal. Monitoring ports allow an

external DMM to monitor the power-supply outputs.

Output Voltage and Current Range Changing

Single Range

The output voltage is limited

by a single maximum value. The

•••••••

output current is limited by a

single maximum value.

Single Range + Peak Current Pulse

A limited amplitude and limited

width current pulse can be

•

sourced beyond the maximum

static current limit.

Autoranging

A wide, continuous range of

voltage and current combinations

•

are available automatically at the

maximum power level.

Multiple-output range changing

Automatic range changing gives

maximum power to two different

••

voltage and current combinations.

Precision multiple-output

range changing

Voltage and current ranges can

•

be chosen independently to

provide greater resolution.

Performance Characteristics

Output ripple and noise 30-160 mV 3-5 mV 3 mV 3 mV 3 mV 3-7 mV 3-7 mV 7-16 mV 10 mV 5-50 mV 3-10 mV 5-8 mV

(Peak-to-peak, 20 Hz to 20 MHz)

(10 to 25 mV

in fast mode)

Output programming response time 200W: 2 ms 2-6 ms 6 ms 2 ms 15 ms 15 ms 30-195 ms 9-60 ms 20-50 ms 0.4-2 ms 60 ms

Rise and fall time with full resistive load (10 to 90%

100-200 ms

(0.4 ms in

and 90 to 10%) Does not include command 1000W:

fast mode)

processing time.

300-2000 ms

Programming resolution

(percent of full scale) 0.025% 0.025% 0.03% 0.007% 0.025% 0.025% 0.025% 0.025% 0.025% 0.03% 0.025% 0.025%

Feature

Descrip-

tions

and

Selection

Index

FEATURE DESCRIPTIONS INDEX