Technical data
48 ac LINE VOLTAGE & CORD OPTIONS
Choosing ac Line Voltage and Cord Options
for your Agilent Power Products
7 EASY STEPS FOR CHOOSING LINE CORD OPTIONS
If no line cord
option is speci-
fied for prod-
ucts which
require 800
series line
cords, an unter-
minated line
cord will be
shipped
automatucally
for the destina-
tion country on
your purchase
order.
Determine the voltage option Line cords for low power products Line cords for high power products
STEP 1 STEP 2 STEP 3 STEP 4 STEP 5 STEP 6 STEP 7 NOTE
If your model
number
requires an
800 series line
cord, deter-
mine if there is
a line cord
with plug that
matches your
outlet recepta-
cle in tables 3a
and b.
If not, choose
the appropri-
ate untermi-
nated line
cord.
Add the option
number for the
appropriate
line cord to
your purchase
order. DONE!
Go to table 1a.
Find the cor-
rect line cord
option series
for the prod-
uct you are
ordering. If
your model #
requires an
800 series, go
to step 6.
If your model
# requires a
900 series line
cord, the cor-
rect one will
automatically
be shipped for
the destina-
tion country
on the pur-
chase order.
DONE!
Go to table 1a.
Find the
model number
of the product
you are order-
ing. Note the
standard line
voltage. If it is
correct you do
not need to
specify a line
voltage
option. Go to
step 4
If the standard
line voltage is
not correct,
use table 1b to
determine
which of the
available
options best
matches the
available line
voltage.
Add the line
voltage option
to your pur-
chase order.
TABLE 1A- AC LINE VOLTAGE/FREQUENCY OPTIONS
6010A, 6011A, 120 100, 220, 230, 240 Yes Yes; internal board mounted switch and quick connect jumpers 800
6012A, 6015A
6023A, 6028A 120 100*, 220, 240 Yes Yes; internal board mounted switch and quick connect jumpers 900
6030A, 6031A, 120 100*, 220, 240 Yes Yes; internal board mounted switch and quick connect jumpers 800
6032A, 6035A
6033A, 6038A 120 100*, 220, 240 Yes Yes; internal board mounted switch and quick connect jumpers 900
605XA, 606XA 120 100*, 220, 240 Yes Yes; internal switches 900
654XA 120 100, 220, 240 Yes Yes; internal board mounted switches 900
655XA 120 100, 220, 230, 240 Yes Yes; internal quick connect jumpers 900
657XA 230 200* Yes Yes; internal board mounted switch 800
66000A 100-240 none Yes Not necessary; automatic wide ranging input 800
6610XA 100-120, 200-240 none Yes Yes; bottom panel switch n.a.
661XC 120 100, 220, 230 Yes Yes; internal quick connect jumpers 900
662XA 120 100, 220, 230, 240 Yes Yes; moveable insert on rear panel mounted line cord module 900
663XXA 120 100, 220, 230 Yes Yes; internal quick connect jumpers 900
663XB 120 100, 220, 230 Yes Yes; internal quick connect jumpers 900
664XA 120 100, 220, 230, 240 Yes Yes; internal board mounted switch 900
665XA 120 100, 220, 230, 240 Yes Yes; internal quick connect jumpers 900
667XA, E4356A 230 200 Yes Yes; internal board mounted switch 800
668XA 220 3Ø 400 3Ø Yes Yes; internal connector mounted jumpers 3Ø; unterminated only
6811B 120 100, 230 Yes Yes; internal connector mounted jumpers 900
6812B 120 100, 230 Yes Yes; internal connector mounted jumpers 800
6813B 230 200 Yes Yes; internal connector mounted jumpers 800
6814B, 6834B 230 3Ø 400 3Ø Yes NO! Board change required, 3 phase input; return to factory 3Ø; unterminated only
E3610A, E3611A, E3612A
115
ØE3 (230 V), ØE9 (100 V)
Yes NO! Transformer change required; return to factory line cord hardwired
E3614A, E3615A, E3616A,
115
ØE3 (230 V), ØE9 (100 V)
Yes Yes; internal board mounted switch
E3617A, E3620A, E3630A
E3631A, E3632A, E3633A,
115
ØE3 (230 V), ØE9 (100 V)
Yes Yes: moveable insert on rear panel mounted ac receptacle
E3634A
E364XA 115
ØE3 (230 V), ØE9 (100 V) Yes Yes, internal board mounted switch
Choosing ac Line Voltage and Cord Options for your Power Product
Power distribution systems, regulations, and connection techniques
vary greatly among geographic regions as a result of local ac electri-
cal standards. Most Agilent products, including power products
which draw less than 500 watts of power from the ac line, can be
readily adjusted to accept different line voltages or frequencies.
Line voltage and frequency for certain Power Products may not be
field changeable. Choosing the correct voltage option for these prod-
ucts requires care. This is especially true for higher power products.
Line voltage / frequency options and method of change are summa-
rized in Table 1a below. Voltages for Europe and Asia Pacific vary
widely from country to country. Europe is moving toward harmo-
nization, with countries standardizing on 230 Vac instead of 220
or 240 Vac. Some older products don’t offer a 230 Vac option. For
countries operating on 230 Vac, option 240 with a range of +6% / -13%
(a range of 208 to 254 Vac) generally offers the best match. See
table 1b for further information. The specifications listed for each
product indicate the range of voltage and frequency that each
option accomodates. If in doubt, contact your local Agilent Field
Engineer for assistance.
Notes: 100*, 200*: for Japan only; derating required, product see specifications
Model Standard Line Voltage 50 HZ Field Changeable; Line Cord
Number Line Voltage Options Operation Method Series
Visit our web site
http://www.agilent.com/find/power
A
B
C
D
E
F
G
I
ac Line
Voltage
and Cord
Options