Technical data

AGILENT dc POWER SUPPLIES
31
Single-Output, Autoranging:
200 W to 1,000 W
(at 0˚ to 55˚ C unless otherwise noted)
SPECIFICATIONS
Remote Sensing:
Up to 2 V drop in each lead. Voltage regulation
specification met with up to 0.5 V drop, but degrades for
greater drops.
Modulation:
(analog programming of output voltage and current)
Input signal: 0 to 5 V or 0 to 4 k Ohms
Regulatory Compliance:
Certified to CSA556B; conforms to
IEC 61010-1.
See page 73 for more information.
Inductive Load:
6023A, 6028A are stable in CC mode for
loads up to 1 H.
Size:
6023A, 6028A: 212.3 mm W x 177.0 mm H x
516.4 mm D (8.36 in x 6.97 in x 17.87 in).
6010A–12B, 6015A: 425.5 mm W x 132.6 mm H
x 516.4 mm D (16.75 in x 5.25 in x 20.33 in).
See page 52 for more details
Warranty:
One year
Ordering Information
S
TANDARD
: 104 to 127 VAC, 48 to 63 Hz
Opt 002 Provides extra programming and monitoring
capabilities
Opt 220 191 to 233 Vac, 48 to 63 Hz $0
Opt 240 209 to 250 Vac, 48 to 63 Hz $0
*Opt 908 Rack-mount Kit for a Single Half-rack Unit
6023A, 6028A, (with blank filler panel); p/n 5062-3960
6010A–12B, 6015A; p/n 5062-3977
*Opt 909 Rack-mount Kit with Handles.
For 6010A–12B,6015A;p/n 5062-3983
Opt 910
Service Manual andextra Operating Manual
A line cord option must be specified for 6010A–12B,
6015A. See pages 48-51 for ordering information.
*Support rails required
ACCESSORIES
1494-0060 Rack Slide Kit
E3663AC Support rails for Agilent rack cabinets
either terminal can be grounded
or floated from chassis ground
6010A 6011A 6012B 6023A 6015A 6028A
Output ratings Voltage 0 to 200 V 0 to 20 V 0 to 60 V 0 to 20 V 0 to 500 V 0 to 60 V
Current 0 to 17 A 0 to 120 A 0 to 50 A 0 to 30 A 0 to 5 A 0 to 10 A
Maximum power Watts 1,200 W 1,064 W 1,200 W 242 W 1,050 W 240 W
Autoranging output V1, P1 200 V, 5 A 20 V, 50 A 60 V, 17.5 A 20 V, 10 A 500 V, 2 A 60 V, 3.3 A
V2, P2 120 V, 10 A 14 V, 76 A 40 V, 30 A 14 V, 17.2 A 350 V, 3 A 40 V, 6 A
V3, P3 60 V, 17 A 7 V, 120 A 20 V, 50 A 6.7 V, 30 A 200 V, 5 A 20 V, 10 A
Ripple and noise, Voltage rms 22 mV 8 mV 8 mV 3 mV 50 mV 3 mV
20 Hz to 20 MHz p-p 50 mV 50 mV 40 mV 30 mV 160 mV 30 mV
Current rms 15 mA 120 mA 25 mA 15 mA 50 mA 5 mA
Load regulation Voltage 0.01%+ 5 mV 3 mV 5 mV 2 mV 40 mV 3 mV
Current 0.01%+ 10 mA 15 mA 10 mA 9 mA 35 mA 5 mA
Transient response time Time 2 ms 2 ms 2 ms 1 ms 5 ms 1 ms
10% step change Level 150 mV 100 mV 100 mV 50 mV 200 mV 75 mV
Supplemental Characteristics
(Non-warranted characteristics determined by design that are useful in applying the product)
Programming Resolution
Voltage 50 mV 5 mV 15 mV 5 mV 125 mV 15 mV
Current 4.25 mA 30 mA 12.5 mA 7.5 mA 1.25 mA 2.5 mA
dc floating voltage ±550 V ±240 V ±240 V ±240 V ±550 V ±240 V
ac input current 100 Vac 24 A 24 A 24 A 6 A 24 A 6 A
120 Vac 24 A 24 A 24 A 6.5 A 24 A 6.5 A
220 Vac 15 A 15 A 15 A 3.8 A 15 A 3.8 A
240 Vac 14 A 14 A 14 A 3.6 A 14 A 3.6 A
Weight Net 16.3 kg (36 lb) 17.2 kg (38 lb) 16.3 kg (36 lb) 9.6 kg (21 lb) 16.3 kg (36 lb) 9.6 kg (21 lb)
Shipping 21.8 kg (48 lb) 22.7 kg (50 lb) 21.8 kg (48 lb) 11.4 kg (25 lb) 21.8 kg (48 lb) 11.4 kg (25 lb)
6010A, 6011A, 6012B, 6015A
6023A, 6028A
V1
I1 I2 I3
Volts
P1
P2
P3
Amps
V2
V3
For more information in the U.S.A. call
1-800-452-4844
Auto-series, auto-parallel operation
Complete front panel control/display
Constant-voltage, constant-current
operation
Remote programming and sensing
Ten-turn voltage and current controls
Autoranging Output:
A
B
C
D
E
F
6010A
6011A
6012B
6015A
6023A
6028A