Technical data

ManualsBrandsAgilent Technologies ManualsConsumer electronics6224B

For more information in the U.S.A. call

1-800-452-4844

AGILENT dc POWER SUPPLIES 27

Single Output - 24 W to 60 W

Manually

Controlled

E3610A, E3611A, E3614A, E3615A, E3616A

and E3612A features: and E3617A features:

Dual ranges Digital voltage and

Digital voltage and current meters

current meters Overvoltage protection

10-turn potentiometer Remote sensing

Linear power supply Remote analog programming

Linear power supply

(at 0˚ to 55˚ C unless otherwise specified)

SPECIFICATIONS

E3610A

☎

E3611A

☎

E3612A

☎

E3614A

☎

E3615A

☎

E3616A

☎

E3617A

☎

Number of output 2221111

ranges

Output ratings

Range 1 0 to 8 V, 0 to 3 A

0 to 20 V, 0 to 1.5 A

0 to 60 V, 0 to 0.5 A

0 to 8 V, 0 to 6 A 0 to 20 V, 0 to 3 A 0 to 35 V, 0 to 1.7 A 0 to 60 V, 0 to 1 A

Range 2 0 to 15 V, 0 to 2 A

0 to 35 V, 0 to 0.85 A

0 to 120 V, 0 to 0.25 A

----

Power (max) 30 W 30 W 30 W 48 W 60 W 60 W 60 W

Load and line 0.01% + 2 mV 0.01% + 2 mV 0.01% + 2 mV 0.01% + 2 mV 0.01% + 2 mV 0.01% + 2 mV 0.01% + 2 mV

regulation

Ripple and noise rms 200 µV 200 ␮V 200 ␮V 200 ␮V 200 ␮V 200 ␮V 200 ␮V

(20 Hz to 20 MHz) peak-to-peak 2 mV 2 mV 2 mV 1 mV 1 mV 1 mV 1 mV

Supplemental Characteristics

(Non-warranted characteristics determined by design and useful in applying the product).

Control mode CV/CC CV/CC CV/CC CV/CC CV/CC CV/CC CV/CC

Meter Resolution Voltage 10 mV 100 mV 100 mV 10 mV 10 mV (0-20V), 100mV (>20V)

(minimum change Current 10 mA 10 mA 1 mA 10 mA 10 mA 1 mA 1 mA

using front-panel

controls)

Power (115 Vac ± 10%) 47 to 63 Hz 47 to 63 Hz 47 to 63 Hz 47 to 63 Hz 47 to 63 Hz 47 to 63 Hz 47 to 63 Hz

E3610A, E3611A, E3612A

These popular low-cost CV/CC bench supplies are designed for

general laboratory use. The constant-voltage, constant-current

output allows operation as either a voltage source or current

source. The changeover occurs automatically, based on the

load. This feature also provides an adjustable current limit, for

a particular DUT. Also, a CC set button lets you set the current

limit without you having to short the output.

Each model has two ranges, allowing more current at a

lower voltage. For a higher output voltage, supplies can be

connected in series. Either the positive or negative terminal

can be connected to ground, providing a positive or negative

voltage output. Either terminal can also be floated up to 240 V

from ground.

Dual digital meters monitor current and voltage simultane-

ously. Adjustments are made with the 10-turn voltage control

and the 10-turn current control. Each power supply is 212 mm

W x 88 mm H x 318 mm D (8.4 in x 3.5 in x 12.5 in) and weighs

3.8 kg (8.4 lbs).

E3614A, E3615A, E3616A, E3617A

These flexible single range CV/CC power supplies can be used

as either voltage sources or current sources. The CC-set button

allows you to quickly set the current limit when operating in

the CV mode, without shorting the output. 10-turn controls

allow accurate adjustment of voltage and current output set-

tings. The output voltage and current can also be controlled

with external 0-10 volt analog voltage or variable resistance.

Output connections can be made on either the front or

rear panel. Remote sensing is available to eliminate the errors

in voltage regulation due to voltage drops in the load leads.

Either the positive or negative output terminal may be

connected to ground to provide positive or negative output

voltage. Either terminal can also be floated to a maximum

of 240 volts. Multiple units can be combined in auto-parallel,

auto-series and auto-tracking configurations to obtain more

voltage or current output.

This load is protected with the overvoltage protection

feature, which is easily monitored and adjusted from the

front panel. The digital voltage and current meters provide

continuous and accurate readings of the output levels. The

E3614A-E3617A are 212 mmW x 88 mmH x 373 mm D

(8.5 in x 3.5 in x 14.7 in).

☎

For 0ff-the-shelf shipment

Maximum current is derated 1% per˚C between 40˚ to 55˚C.

Ordering Information

Opt 0E3

230 Vac ±10% operation, 47 to 63 Hz.

(Use with 220V input line.)

Opt 0E9

100 Vac ±10% operation; 47 to 63 Hz

(for use in Japan)