Technical data
6030A
6031A
6032A
6033A
6035A
6038A
Features:
Standard Commands
for Programmable Instruments
VXI
plug&play
drivers
For more information in the U.S.A. call
1-800-452-4844
A
B
C
D
E
System
dc Power
Supplies
V1
I1 I2 I3
Volts
P1
P2
P3
Amps
V2
V3
6033A, 6038A
6030A, 6031A, 6032A, 6035A
Autoranging Output:
(at 0˚ to 55˚ C unless otherwise noted)
SPECIFICATIONS
Remote Sensing:
Up to 2 V drop in each lead. Voltage regulation
specification met with up to 0.5 V drop, but degrades for
greater drops.
Modulation:
(analog programming of output voltage and current)
Input signal: 0 to 5 V or 0 to 4 k Ohms
Size:
6030A–32A, 6035A: 425.5 mm W x 132.6 mm H x
503.7 mm D (16.75 in x 5.25 in x 19.83 in).
6033A, 6038A:
212.3 mm W x 177.0 mm H x 516.4 mm D
(8.36 in x 6.97 in x 17.87 in).
See page 52 for more details.
Warranty:
Three years
Ordering Information
S
TANDARD
: 104 to 127 VAC, 48 to 63 Hz
Opt 001 Front panel has only line switch, line indicator,
and OVP adjust (6030A–33A and 6038A only)
Opt 100 87 to 106 Vac, 48 to 63 Hz (power supply
output
is derated to 75%)
Opt 220 191 to 233 Vac, 48 to 63 Hz $0
Opt 240 209 to 250 Vac, 48 to 63 Hz $0
Opt 800 Rack-mount Kit for Two Half-rack Units+$87
Side by Side. Lock link Kit p/n 5061-9694 and
7 in Rack adapter Kit 5063-9215
*Opt 908 Rack-mount Kit for a Single Half-rack Unit
6033A and 6038A(with blank filler panel);
p/n 5062-3960, 6030A–32Aand 6035A;
p/n 5062-3977
*Opt 909 Rack-mount Kit with Handles.
For 6030A–32A, 6035A; p/n 5062-3983
*Support rails required
either terminal can be grounded
or floated from chassis ground
System Autorangers 6030A 6031A 6032A 6033A 6035A 6038A
Output ratings Voltage 0 to 200 V 0 to 20 V 0 to 60 V 0 to 20 V 0 to 500 V 0 to 60 V
Current 0 to 17 A 0 to 120 A 0 to 50 A 0 to 30 A 0 to 5 A 0 to 10 A
Maximum power Watts 1,200 W 1,064 W 1,200 W 242 W 1,050 W 240 W
Autoranging output V1, P1 200 V, 5 A 20 V, 50 A 60 V, 17.5 A 20 V, 10 A 500 V, 2 A 60 V, 3.3 A
V2, P2 120 V, 10 A 14 V, 76 A 40 V, 30 A 14 V, 17.2 A 350 V, 3 A 40 V, 6 A
V3, P3 60 V, 17 A 7 V, 120 A 20 V, 50 A 6.7 V, 30 A 200 V, 5 A 20 V, 10 A
Programming accuracy Voltage 0.035% +145 mV 0.035% +15 mV 0.035% +40 mV 0.035% +9 mV 0.25% +400 mV 0.035% +40 mV
at 25°C ±5°C Current 0.2% +25 mA 0.25% +250 mA 0.2% +85 mA 0.15% +20 mA 0.3% +63 mA 0.09% +10 mA
Ripple and noise, Voltage rms 22 mV 8 mV 8 mV 3 mV 50 mV 3 mV
20 Hz to 20 MHz p-p 50 mV 50 mV 40 mV 30 mV 160 mV 30 mV
Current rms 15 mA 120 mA 25 mA 30 mA 50 mA 5 mA
Readback accuracy Voltage 0.08% +80 mV 0.08% +7 mV 0.08% +20 mV 0.07% +6 mV 0.5% +300 mV 0.07% +50 mV
at 25°C ±5°C Current 0.36% +15 mA 0.4% +100 mA 0.36% +35 mA 0.3% +25 mA 0.5% +50 mA 0.2% +11 mA
Load regulation Voltage 0.01%+ 5 mV 3 mV 5 mV 2 mV 40 mV 3 mV
Current 0.01%+ 10 mA 15 mA 10 mA 9 mA 35 mA 5 mA
Line regulation Voltage 0.01%+ 5 mV 2 mV 3 mV 1 mV 13 mV 2 mV
Current 0.01%+ 5 mA 25 mA 10 mA 6 mA 18 mA 2 mA
Transient response time Time 2 ms 2 ms 2 ms 1 ms 5 ms 1 ms
10% step change Level 150 mV 100 mV 100 mV 50 mV 200 mV 75 mV
Supplemental Characteristics (Non-warranted characteristics determined by design that are useful in applying the product)
Programming Resolution
Voltage 50 mV 5 mV 15 mV 5 mV 125 mV 15 mV
Current 4.25 mA 30 mA 12.5 mA 7.5 mA 1.25 mA 2.5 mA
dc floating voltage ±550 V ±240 V ±240 V ±240 V ±550 V ±240 V
ac input current 100 Vac 24 A 24 A 24 A 6 A 24 A 6 A
120 Vac 24 A 24 A 24 A 6.5 A 24 A 6.5 A
220 Vac 15 A 15 A 15 A 3.8 A 15 A 3.8 A
240 Vac 14 A 14 A 14 A 3.6 A 14 A 3.6 A
Weight Net 16.3 kg (36 lb) 17.2 kg (38 lb) 16.3 kg (36 lb) 9.6 kg (21 lb) 16.3 kg (36 lb) 9.6 kg (21 lb)
Shipping 21.8 kg (48 lb) 22.7 kg (50 lb) 21.8 kg (48 lb) 11.4 kg (25 lb) 21.8 kg (48 lb) 11.4 kg (25 lb)
ACCESSORIES
5080-2148
Serial LinkCable,
2 m (6.6 ft)
1494-0060
Rack Slide Kit
E3663AC
Support rails for
Agilent rack cabinets
Opt 910
Service Manual and
extra Operating Manual
A line cord option must be
specified for 6030A–32A, 6035A.
See pages 48-51 for
ordering information.
AGILENT SYSTEM dc POWER SUPPLIES 19
Single-Output,
Autoranging:
200 W to 1,000 W