Technical data
E3632A
E3633A
E3634A
AGILENT SYSTEM dc POWER SUPPLIES 13
Single-Output: 120 W to 200 W
(at 0˚ to 55˚ C unless otherwise specified)
E3632A
☎
E3633A
☎
E3634A
☎
(Low Range) / (High Range) (Low Range) / (High Range) (Low Range) / (High Range)
Output ratings Voltage/Current 0 to 15 V, 7 A/0 to 30 V, 4 A 0 to 8 V, 20 A/0 to 20 V, 10 A 0 to 25 V, 7 A/0 to 50 V, 4 A
Load regulation Voltage <0.01% + 2 mV <0.01% + 2 mV <0.01% + 2 mV
Current <0.01% + 250
µA <0.01% + 250 µA <0.01% + 250 µA
Line regulation Voltage <0.01% + 2 mV <0.01% + 2 mV <0.01% + 2 mV
Current <0.01% + 250
µA <0.01% + 250 µA <0.01% + 250 µA
Ripple and noise Normal-mode voltage <350 µVrms/2 mVpp <350 µVrms/3 mVpp <500 µVrms/3 mVp-p
(20 Hz to 20 mHz) Normal-mode current <2 mA rms <2 mA rms <2 mA rms
Common-mode current <1.5 µA rms <1.5 µA rms <1.5 µA rms
Programming Voltage 0.05% + 10 mV 0.05% + 10 mV 0.05% + 10 mV
accuracy Current 0.2% +10 mA 0.2% +10 mA 0.2% +10 mA
(25˚C ±5˚C)
Readback accuracy Voltage 0.05% + 5 mV 0.05% + 5 mV 0.05% + 5 mV
(25˚C ±5˚C)
Current
0.15% + 5 mA 0.15% + 5 mA 0.15% + 5 mA
Resolution Program/readback
1 mV, 0.5 mA/0.5 mV, 0.1 mA 1 mV, 1 mA/0.5 mV, 1 mA 3 mV, 0.5 mA/1.5 mV, 0.5 mA
Meter 1 mV, 1 mA 1 mV, 1 mA (
<10 A/10 mA
(
≥10 A)
1 mV, 1 mA (
<10 A/10 mA
(
≥10 A)
Transient response 50 µsec for output to recover to within 15 mV following a change in output current from full load to half load or vice versa
☎
For off-the-shelf shipment
SPECIFICATIONS
E3632A, E3633A, E3634A Single-Output
The E3632A, E3633A, and E3634A are 120 watt/200 watt sin-
gle-output dual range programmable dc power supplies
designed to meet the most exacting engineering requirements
with traditional Agilent quality and reliability designed in.
Low Noise/Excellent Regulation
0.01% load and line regulation keep the output steady. The
linear supply specifies both normal mode voltage noise and
common mode current noise. The low normal mode
specification assures clean power for precision circuitry
and the low common mode current provides isolation from
power line current injection.
Remote Interface
These supplies come with GPIB and RS-232. They allow
you program both voltage and current. You can monitor the out-
put terminals for voltage and current, and a query command lets
you read the programmed voltage and current. All programming
is done in easy to use SCPI. VISA
plug&play
driver is available.
Front Panel Operation
Both voltage and current can be monitored simultaneously
for output from the front panel on an easy to read vacuum
flourescent display. A knob allows you to set the output at
the resolution you need for the most exacting adjustments,
quickly and easily. Store and recall key enables you to save
and recall up to three frequently used operating states. The
output on/off button enables/disables the output.
Isolated
All the outputs are isolated from the chassis ground and from
the remote interface.
Supplemental Characteristics
ac Input:
100 Vac ± 10%, 47 to 63Hz (Opt 0E9)
115 Vac ± 10%, 47 to 63Hz (Standard)
230 Vac ± 10%, 47 to 63Hz (Opt 0E3)
Product Regulation: Designed to comply with UL1244,
IEC 61010-1; certified with CSA 22.2
Meets requirements for CE regulation
Warranty: 3 years
Size:
E3632A, E3633A, E3634A 213 mmW x 132 mmH x 348 mmD
(8.4 in. x 5.2 in. x 13.7in.)
Weight:
E3632A, E3633A, E3634A
9.5 kg (21 lbs)
E3632A Features: E3633A and E3634A Features:
105/120 watts of power 160/200 watts of power
15 V, 7 A/30 V, 4 A single output dual range Single-output, dual range
Low noise/excellent regulation Front and rear output terminals
Two digital meters Low noise/excellent regulation
Remote sense, OVP & OCP capability Remote sense, OVP & OCP capability
16-bit programming resolution 16-bit programming resolution
and high accuracy and high accuracy
GPIB/RS-232 standard GPIB/RS-232 standard
E3632A, E3633A, E3634A
A
B
C
D
E
System
dc Power
Supplies
For more information in the U.S.A. call
1-800-452-4844