Specifications

76
Low-Profile Modular Power System
50-100 W GPIB (Continued)
M ore detailed specifications at www.agilent.com/find/N6700
High Performance DC Power Supplies speed and accuracy for test optimization
Supplemental Characteristics
(Non-warranted characteristics determined by design
that are useful in applying the product)
Programming Resolution
Voltage 3.5 mV 4 mV 7 mV 10 mV 18 mV 28 mV
Current 7 mA 4 mA 3 mA 2 mA 1 mA 0.5 mA
Output Ripple and Noise (PARD)
CC rms 8 mA 4 mA 2 mA 2 mA 2 mA 2 mA
Over-voltage Protection
Accuracy (without relay option) 0.25% + 0.25% + 0.25% + 0.25% + 0.25% + 0.25% +
50 mV 50 mV 75 mV 100 mV 200 mV 250 mV
Response Time 50 µs from occurence of 0V condition to start of output shutdown
Maximum Up-programming and Down-programming Time with full resistive load:
(time from 10% to 90% of total voltage excursion)
Voltage setting from 0 V to 20 ms 20 ms 20 ms 20 ms 20 ms 20 ms
full scale and full scale to 0 V
Maximum Up-programming and Down-programming Settling Time with full resistive load:
(time from start of voltage change until voltage settles within 0.1% of the full-scale voltage of its final value)
Voltage setting from 0 V to 100 ms 100 ms 100 ms 100 ms 100 ms 100 ms
full scale and full scale to 0 V
N6750/60 Low Noise Outputs
This switching power supply
outperforms most linear power
supplies on the market with low
normal and common mode noise.
N6750/60 Output Programming Speed
The N6750/60 achieves performance
unlike a typical DC power supply
with up to 10 to 50 times faster
than other programmable power
supplies. Thanks to an active down-
programming circuit to rapidly
pull down the output when lowering
the module’s output voltage, the
N6750/60 can rapidly program
both up and down in voltage. These
output speeds allow the N6750/60
to give maximum system throughput
when your test calls for frequent
changes in power supply voltage set-
tings.
N6750/60 Autoranging for Flexibility
The N6750/60 gives test system
designers even more flexibility
by providing autoranging outputs.
This autoranging capability provides
maximum output power at any out-
put voltage up to 50 V. This allows
one power supply to do the job of
several power supplies because its
operating range covers low voltage,
high current as well as high voltage,
low current operating points.
N6750/60 High-Speed Test Extensions
To make your testing go even faster,
the N6750/60 offer High-Speed Test
Extensions (HSTE) which comes
standard on the N6760 and optional
on the N6750. This enhancement to
the N6750/60 DC Power Modules
extends the capabilities to include
features similar to a built-in
arbitrary waveform generator and
a built-in oscilloscope. Through the
LIST mode of HSTE, you can down-
load up to 512 setpoints of voltage
and current. In LIST mode, you
can program the output to execute
a LIST of voltage and current
setpoints. For each setpoint, a
dwell time can be specified and the
power supply will stay (i.e., dwell)
at that setpoint for the programmed
dwell time value.
The HSTE also provides an
oscilloscope-like digitizer built
into the power module to capture
voltage and current measurements.
N6730/40 Family
The Agilent N6730 and N6740
families of DC power modules
provide programmable voltage
and current, measurement and
protection features at a very
economical price, making these
modules suitable to power the
DUT or to provide power for ATE
system resources, such as fixture
control. The N6730/40 families
give you clean, reliable DC power
without advanced features, plus
gives you the added benefits of
being apart of the N6700 MPS
including small size (true 1U),
mix-and-match with other N6700
DC Power Modules when you need
performance along with basic DC
outputs, connectivity via LAN,
USB, and GPIB, and fast command
processing time of less than 1 ms.
Specifications
(at 0
˚
to 55
˚
C, and
derated above 40
˚
C)
N6731B N6732B N6733B N6734B N6735B N6736B