Specifications

75
Series and Parallel Operation
To increase the available power,
similarly rated outputs can be
operated in series for greater
output voltage or in parallel for
greater output current.
To simplify parallel operation, the
N6700 offers virtual channels, a
firmware based feature that allows
the N6700 system to treat up to
4 channels as a single, synchronized
channel. Once configured, all func-
tions (sourcing, measurements,
triggering, protection, and status
monitoring) behave as if there is
1 channel of up to 4 times the
capacity of a single channel, with-
out writing a single line of code
to manage the interaction and
synchronization of the paralleled
power supplies.
Triggering
The N6700B Low-Profile MPS
mainframe has hardware trigger
in/trigger out signals which permit
the N6700 to be synchronized with
external events.
Output Disconnect Relays
Each module in the N6700 can be
individually ordered with optional
Output Disconnect Relays. These
relays disconnect both the plus
and minus side of the power
supply, including the sense leads.
Universal AC Input
The N6700 has a universal input
that operates from 100-240 Vac,
50/60/400 Hz. There are no switches
to set or fuses to change when
switching from one voltage standard
to another. The AC input employs
power factor correction.
Low-Profile Modular Power System
50-100 W GPIB (Continued)
Specifications
(at 0
˚
to 55
˚
C, and
derated above 40
˚
C)
M ore detailed specifications at www.agilent.com/find/N6700
High Performance DC Power Supplies speed and accuracy for test optimization
N6731B N6732B N6733B N6734B N6735B N6736B
Choosing the right DC Power
Modules to meet your ATE needs
N6750 Family
The Agilent N6750 family of high-
performance, autoranging DC power
modules provides low noise, high
accuracy and includes, autoranging
output capabilities enabling one
power supply to do the job of several
traditional power supplies. In addi-
tion, it includes optional high-speed
test extensions that offers an oscillo-
scope-like digitizer and ultra-fast
programming speed.
N6760 Family
The Agilent N6760 family of precision
DC power modules provides precise
control and measurements in the
milliampere and microampere region
with the ability to simultaneously
digitize voltage and current, and
capture those measurements in an
oscilloscope-like data buffer. These
precision DC power modules offer
dual ranges on both programming
and measurement and are ideally
suited for semiconductor and
passive device testing.
1
With an output change from no load to full load, up tp a maximum load-lead drop of 1 V per lead.
2
Applies from minimum to maximum programming range. (see Supplemental Characteristics)
Ouput Ratings
Voltage 5 V 8 V 20 V 35 V 60 V 100 V
Current 10 A 6.25 A 2.5 A 1.5 A 0.8 A 0.5 A
Power 50 W 50 W 50 W 50 W 50 W 50 W
Programming Accuracy
2
(at 23°C ±5°C)
Voltage 0.1% + 0.1% + 0.1% + 0.1% + 0.1% + 0.1% +
19 mV 19 mV 20 mV 35 mV 60 mV 100 mV
Current 0.15% + 0.15% + 0.15% + 0.15% + 0.15% + 0.15% +
20 mA 20 mA 20 mA 20 mA 20 mA 10 mA
Readback Accuracy (at 23°C ±5°C)
Voltage 0.1% + 0.1% + 0.1% + 0.1% + 0.1% + 0.1% +
20 mV 20 mV 20 mV 35 mV 60 mV 100 mV
Current 0.15% + 0.15% + 0.15% + 0.15% + 0.15% + 0.15% +
20 mA 10 mA 5 mA 4 mA 4 mA 2 mA
Output Ripple and Noise (PARD)
(from 20 Hz – 20 MHz)
CV peak-to-peak 10 mV 12 mV 14 mV 15 mV 25 mV 30 mV
CV rms 2 mV 2 mV 3 mV 5 mV 9 mV 18 mV
Load Regulation
1
Voltage 5 mV 6 mV 9 mV 11 mV 13 mV 20 mV
Current 2 mA 2 mA 2 mA 2 mA 2 mA 2 mA
Line Regulation
Voltage 1 mV 2 mV 2 mV 4 mV 6 mV 10 mV
Current 1 mA 1 mA 1 mA 1 mA 1 mA 1 mA
Transient Response Time (time to recover to within the settling band following a load
change from 50% to 100% and from 100% to 50% of full load.)
Voltage settling band ± 80 mV ± 80 mV ± 200 mV ± 200 mV ± 400 mV ± 500 mV
Time 200 µs 200 µs 200 µs 200 µs 200 µs 200 µs