Specifications

181
Connectivity
The Agilent IntuiLink Arbitrary
Waveform software allows you to
easily create, edit, and download
complex waveforms using the
waveform editor. Or you can cap-
ture a waveform using IntuiLink
for Oscilloscope and send it to
the 33220A for output. To find
out more about IntuiLink, visit
www.agilent.com/find/intuilink.
Software Driver:
• SCPI
• VXIPlug&Play
• IVI.com
Ordering Information
Agilent 33220A
20 MHz Function/Arbitrary
Wavefrom Generator
Accessories included
Operating manual, service manual,
quick reference guide, IntuiLink waveform
editor software, test data, USB cable,
and power cord.
Options
Opt. 001 External frequency reference
Opt. 0B0 Delete manual
Opt. 1CM Rackmount kit
(also sold as Agilent 34190A)
Opt. A6J ANSI Z540 calibration
Other Accessories
34131A Carrying case
34161A Accessory pouch
34190A Rackmount kit
Footnotes:
1
add 1/10th of output amplitude and offset
spec per °C for operation outside the range
of 18°C to 28°C
2
Autorange enabled
3
DC offset set to 0 V
4
spurious output at low amplitude is
–75 dBm typical
5
add 1 ppm/°C average for operation
outside the range of 18°C to 28°C
6
FSK uses trigger input (1 MHz maximum)
7
Sine and square waveforms above 6 MHz
are allowed only with an “infinite” burst count
Function/Arbitrary Waveform Generator
33220A 20 MHz (Continued)
More detailed specifications at www.agilent.com/find/33220A
Agilent Function/Arbitrary Waveform Generators
Specifications
(at 0
˚
to 55
˚
C unless
otherwise specified)
Sweep Waveforms Sine, Square, Ramp, Arb
Type Linear or Logarithmic
Direction Up or Down
Sweep time 1 ms to 500 s
Trigger Single, External, or Internal
Marker falling edge of sync signal (programmable frequency)
Burst
7
Waveforms Sine, Square, Ramp, Triangle, Pulse, Noise, Arb
Type Counted (1 to 50,000 cycles), Infinite, Gated
Start/Stop Phase -360° to +360°
Internal Period 1 µs to 500 s
Gate Source External trigger
Trigger source Single, External or Internal
General Power Supply CAT II
100 - 240 V @ 50/60 Hz (-5%, +10%)
100 - 120 V @ 400 Hz (±10%)
Power Consumption 50 VA max
Operating 0°C to 55°C
Temperature
Interface USB, GPIB, and LAN standard
Language SCPI - 1993, IEEE-488.2
Dimensions (W x H x D)
Bench top 261.1 mm x 103.8 mm x 303.2 mm
Rack mount 212.8 mm x 88.3 mm x 272.3 mm
Weight 3.4 kg (7.5 lbs)
Warranty 1 year
Agilent Model: 33220A
272.3mm
303mm
212.8mm
88.3mm
To p
Side
Rear