Technical data

96 Agilent 6200 Series TOF and 6500 Series Q-TOF LC/MS System Concepts Guide
3 Methods with Acquisition Parameters
Method editing
Location of method folders
You can save methods to any folder on the system. The default
folder is D:\MassHunter\Methods\.
You can view the name and path of the currently loaded method
in the Properties tab of the Method Editor window (Figure 45).
Method editing
You can edit methods containing data acquisition parameters
using the Method Editor window of the Data Acquisition
software.
Use this location for method development. The set points are
sent to the instrument when the method is loaded and when
you click the Apply button after changing a parameter.
Methods can also contain Qualitative Analysis and Quantitative
Analysis parameters. You can modify the Qualitative Analysis
and Quantitative Analysis parts of the method in the DA tab in
the Method Editor window. See the Agilent MassHunter
Workstation Software Qualitative Analysis Familiarization
Guide or the online Help for the Qualitative Analysis program
for more information on the Qualitative Analysis software. See
the Agilent MassHunter Workstation Software Quantitative
Analysis Familiarization Guide or the online Help for the
Quantitative Analysis program for more information on the
Quantitative Analysis software.
SCP_ProcessQuantReport Runs a single sample Quant report.
Quantitative Analysis must be installed. Use
only as a Post Method script.
SCP_CTCReset Resets the CTC autosampler. If a drawer is
open, it will be closed.
Table 10 System scripts and the actions they enable
Script name Actions the script enable