Technical data

45
Agilent Technologies
Agilent 6200 Series TOF and 6500 Series Q-TOF LC/MS System
2
Instrument Preparation
LC preparation 46
LC module setup 46
Column equilibration and conditioning 48
TOF and Q-TOF preparation – calibration and tuning 51
TOF mass calibration 51
Tuning choices 53
Tune reports 59
Storage and retrieval of tune results and Instrument Mode 60
Tune Set Point Modifications for Medium and Large Proteins 62
Real-time displays 63
Instrument Status Window 63
Real-time parameter values (Actuals) 64
Real-time Chromatogram Plot and Spectral Plot windows 66
System logbook 68
Learn about the concepts that can help you prepare the
instrument for use.
This chapter assumes that the hardware and software are
installed, the instrument is configured and the performance
verified. If this has not been completed, see the Agilent 6200
Series Time-of-Flight LC/MS System Installation Guide or the
Agilent 6500 Series Quadrupole Time-of-Flight LC/MS System
Installation Guide.