Technical data

Overview 1
Help for data analysis
Agilent 6200 Series TOF and 6500 Series Q-TOF LC/MS System Concepts Guide 13
Set up data acquisition methods
• Enter and save parameter values for all LC modules and the
Agilent 6200 Series TOF and 6500 Series Q-TOF
to a data
acquisition method.
• Enable reference mass correction and select reference
standard masses to correct the mass assignments during
asample run.
• Select and label the total ion chromatograms or extracted ion
chromatograms that you want to appear in the real-time plot.
• Set up time segments for each run where parameters change
with the time segment or with the experiments within the
time segment.
• Print an acquisition method report.
Acquire data
• Enter sample information and pre- or post-analysis programs
(scripts) and run single samples interactively
A worklist is a list of a sequence of
samples that you enter and run
automatically with the Data
Acquisition program.
• Enter and automatically run both individual samples and
sequences of samples in a worklist
• Set up pre- and post-analysis scripts to run between samples
in a worklist.
• Set up and run a worklist.
Help for data analysis
Agilent MassHunter Workstation Software - Qualitative Analysis
Qualitative Analysis is the primary program you use to work
with your TOF and Q-TOF data. You can use the Find
Compounds capability to confirm the presence of known
compounds with targeted MS/MS data, identify unknowns with
auto MS/MS data and do molecular feature extraction with MS
data. You can also search the data file for the presence of
specified formulas.