Technical data

Data Acquisition 4
Some of the Additional Information parameters
Agilent 6200 Series TOF and 6500 Series Q-TOF LC/MS System Concepts Guide 101
Auto Increment If you want to use the same file name and have
the system automatically change the number at the end of the
file name, you turn auto-increment on. Then, you type a file
name that ends in the number 001, and the system makes sure
that a new file is created every time you re-run that sample.
Other folders
You can save your data to any folder on the system. You must
use the browse button to select a different folder. To open any
data file saved to a different folder than D:\MassHunter\Data,
you must browse to the different folder.
Some of the Additional Information parameters
Sample Type
You specify one of the following types for a single sample run:
Sample, Calibration, QC, Blank, DoubleBlank, Matrix,
MatrixDup, MatrixBlank, ConCal, TuneCheck, and
ResponseCheck.
Method Type
Acquisition Only, DA Only, or Both Acquisition and DA.
Run Types
This value is not shown by default. You can add it by clicking the
+ button and adding it using the Add Parameters dialog box.
Standard Start for LC runs
Manual Run for infusion runs with a syringe pump
External Start for AP-MALDI
LC Only Run for when you do not acquire MS data