Technical data

Agilent G1978A Multimode for 6210/6220 TOF

Set-Up Guide

Agilent Technologies

Installation Verification

Step 1. Auto tune 38

Step 2. Set up method names and parameters 44

Step 3. Create MMCHECKTOF_EI_POS.m 45

Step 4. Create MMCHECKTOF_EI_NEG.m 47

Step 5. Create MMCHECKTOF_CI_POS.m 49

Step 6. Create MMCHECKTOF_CI_NEG.m 51

Step 7. Create MMCHECKTOF_MX_EI POS_CI POS.m 53

Step 8. Create MMCHECKTOF_MX_EI NEG_CI NEG.m 55

Step 9. Run each of the methods created 57

Step 10. Calculate the response of Multimode Demo 65

Step 11. Fill out Multimode Report for calculation of peak heights 66

In this chapter, you create and run methods to check out the system. See “ESI

+ APCI LC Demo Sample” on page 105 for structural information on the demo

sample that is used in this chapter.