Technical data

Installation 1
Agilent Multimode for 6210/6220 TOF Installation and Maintenance Guide 29
Figure 27 Multimode End Cap Assembly (p/n G1978-60060)
11 Remove any cables such as APCI vaporizer heater cable and APCI high
voltage cable and any other cables such as RS 232 cable on APPI source.
Field shaping electrode,
9 o’clock position
Field shaping electrode,
6 o’clock position
CAUTION
When converting back to any of the sources other than the G1978A the HV module,
disconnect the +15V DC power from the module.