Technical data

1 Installation
16 Agilent Multimode for 6210/6220 TOF Installation and Maintenance Guide
Step 5. Install the HV control PCA and cables
1 Attach the attach the RS-232 cable to the HV and control PCA power supply
RS 232 connector.
Figure 7 Attaching RS-232 Cable
2 Remove the cover from the HV module (p/n G1978-60050)
Figure 8 Removing HV Module Cover
3 Attach the HV and control PCA to the tube. The instrument front cover, top
cover, safety cover with magnet, and side panel access door should be off.
4 Remove the plastic cable clamp from the desolvation heater cable. Pull the
cable down so the HV Module can fit in the location.